camel-ssh-kafka-connector source configuration

Connector Description: Execute commands on remote hosts using SSH.

When using camel-ssh-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-ssh-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

To use this source connector in Kafka connect you’ll need to set the following connector.class

connector.class=org.apache.camel.kafkaconnector.ssh.CamelSshSourceConnector

The camel-ssh source connector supports 50 options, which are listed below.

Name Description Default Priority

camel.source.path.host

Required Sets the hostname of the remote SSH server.

HIGH

camel.source.path.port

Sets the port number for the remote SSH server.

22

MEDIUM

camel.source.endpoint.failOnUnknownHost

Specifies whether a connection to an unknown host should fail or not. This value is only checked when the property knownHosts is set.

false

MEDIUM

camel.source.endpoint.knownHostsResource

Sets the resource path for a known_hosts file.

MEDIUM

camel.source.endpoint.timeout

Sets the timeout in milliseconds to wait in establishing the remote SSH server connection. Defaults to 30000 milliseconds.

30000L

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.pollCommand

Sets the command string to send to the remote SSH server during every poll cycle. Only works with camel-ssh component being used as a consumer, i.e. from(ssh://…​) You may need to end your command with a newline, and that must be URL encoded %0A.

MEDIUM

camel.source.endpoint.sendEmptyMessageWhenIdle

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut].

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

MEDIUM

camel.source.endpoint.pollStrategy

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

MEDIUM

camel.source.endpoint.channelType

Sets the channel type to pass to the Channel as part of command execution. Defaults to exec.

"exec"

MEDIUM

camel.source.endpoint.shellPrompt

Sets the shellPrompt to be dropped when response is read after command execution.

MEDIUM

camel.source.endpoint.sleepForShellPrompt

Sets the sleep period in milliseconds to wait reading response from shell prompt. Defaults to 100 milliseconds.

100L

MEDIUM

camel.source.endpoint.backoffErrorThreshold

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

MEDIUM

camel.source.endpoint.backoffIdleThreshold

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

MEDIUM

camel.source.endpoint.backoffMultiplier

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

MEDIUM

camel.source.endpoint.delay

Milliseconds before the next poll.

500L

MEDIUM

camel.source.endpoint.greedy

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

MEDIUM

camel.source.endpoint.initialDelay

Milliseconds before the first poll starts.

1000L

MEDIUM

camel.source.endpoint.repeatCount

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0L

MEDIUM

camel.source.endpoint.runLoggingLevel

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF].

Enum values:

  • TRACE

  • DEBUG

  • INFO

  • WARN

  • ERROR

  • OFF

"TRACE"

MEDIUM

camel.source.endpoint.scheduledExecutorService

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

MEDIUM

camel.source.endpoint.scheduler

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.

"none"

MEDIUM

camel.source.endpoint.schedulerProperties

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

MEDIUM

camel.source.endpoint.startScheduler

Whether the scheduler should be auto started.

true

MEDIUM

camel.source.endpoint.timeUnit

Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS].

Enum values:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

"MILLISECONDS"

MEDIUM

camel.source.endpoint.useFixedDelay

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

MEDIUM

camel.source.endpoint.certResource

Sets the resource path of the certificate to use for Authentication. Will use ResourceHelperKeyPairProvider to resolve file based certificate, and depends on keyType setting.

MEDIUM

camel.source.endpoint.certResourcePassword

Sets the password to use in loading certResource, if certResource is an encrypted key.

MEDIUM

camel.source.endpoint.keyPairProvider

Sets the KeyPairProvider reference to use when connecting using Certificates to the remote SSH Server.

MEDIUM

camel.source.endpoint.keyType

Sets the key type to pass to the KeyPairProvider as part of authentication. KeyPairProvider.loadKey(…​) will be passed this value. From Camel 3.0.0 / 2.25.0, by default Camel will select the first available KeyPair that is loaded. Prior to this, a KeyType of 'ssh-rsa' was enforced by default.

MEDIUM

camel.source.endpoint.password

Sets the password to use in connecting to remote SSH server. Requires keyPairProvider to be set to null.

MEDIUM

camel.source.endpoint.username

Sets the username to use in logging into the remote SSH server.

MEDIUM

camel.component.ssh.failOnUnknownHost

Specifies whether a connection to an unknown host should fail or not. This value is only checked when the property knownHosts is set.

false

MEDIUM

camel.component.ssh.knownHostsResource

Sets the resource path for a known_hosts file.

MEDIUM

camel.component.ssh.timeout

Sets the timeout in milliseconds to wait in establishing the remote SSH server connection. Defaults to 30000 milliseconds.

30000L

MEDIUM

camel.component.ssh.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.component.ssh.pollCommand

Sets the command string to send to the remote SSH server during every poll cycle. Only works with camel-ssh component being used as a consumer, i.e. from(ssh://…​) You may need to end your command with a newline, and that must be URL encoded %0A.

MEDIUM

camel.component.ssh.autowiredEnabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

MEDIUM

camel.component.ssh.channelType

Sets the channel type to pass to the Channel as part of command execution. Defaults to exec.

"exec"

MEDIUM

camel.component.ssh.configuration

Component configuration.

MEDIUM

camel.component.ssh.shellPrompt

Sets the shellPrompt to be dropped when response is read after command execution.

MEDIUM

camel.component.ssh.sleepForShellPrompt

Sets the sleep period in milliseconds to wait reading response from shell prompt. Defaults to 100 milliseconds.

100L

MEDIUM

camel.component.ssh.certResource

Sets the resource path of the certificate to use for Authentication. Will use ResourceHelperKeyPairProvider to resolve file based certificate, and depends on keyType setting.

MEDIUM

camel.component.ssh.certResourcePassword

Sets the password to use in loading certResource, if certResource is an encrypted key.

MEDIUM

camel.component.ssh.keyPairProvider

Sets the KeyPairProvider reference to use when connecting using Certificates to the remote SSH Server.

MEDIUM

camel.component.ssh.keyType

Sets the key type to pass to the KeyPairProvider as part of authentication. KeyPairProvider.loadKey(…​) will be passed this value. From Camel 3.0.0 / 2.25.0, by default Camel will select the first available KeyPair that is loaded. Prior to this, a KeyType of 'ssh-rsa' was enforced by default.

MEDIUM

camel.component.ssh.password

Sets the password to use in connecting to remote SSH server. Requires keyPairProvider to be set to null.

MEDIUM

camel.component.ssh.username

Sets the username to use in logging into the remote SSH server.

MEDIUM

The camel-ssh source connector has no converters out of the box.

The camel-ssh source connector supports 1 transforms out of the box, which are listed below.

  • org.apache.camel.kafkaconnector.ssh.transformers.SshTransforms

The camel-ssh source connector has no aggregation strategies out of the box.