Printer

Since Camel 2.1

Only producer is supported

The Printer component provides a way to direct payloads on a route to a printer. Obviously the payload has to be a formatted piece of payload in order for the component to appropriately print it. The objective is to be able to direct specific payloads as jobs to a line printer in a camel flow.

The functionality allows for the payload to be printed on a default printer, named local, remote or wireless linked printer using the javax printing API under the covers.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-printer</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

Since the URI scheme for a printer has not been standardized (the nearest thing to a standard being the IETF print standard) and therefore not uniformly applied by vendors, we have chosen "lpr" as the scheme.

lpr://localhost/default[?options]
lpr://remotehost:port/path/to/printer[?options]

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Printer component supports 2 options, which are listed below.

Name Description Default Type

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

Endpoint Options

The Printer endpoint is configured using URI syntax:

lpr:hostname:port/printername

with the following path and query parameters:

Path Parameters (3 parameters)

Name Description Default Type

hostname (producer)

Required Hostname of the printer.

String

port (producer)

Port number of the printer.

int

printername (producer)

Name of the printer.

String

Query Parameters (11 parameters)

Name Description Default Type

copies (producer)

Number of copies to print.

1

int

docFlavor (producer)

Sets DocFlavor to use.

DocFlavor

flavor (producer)

Sets DocFlavor to use.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

mediaSize (producer)

Sets the stationary as defined by enumeration names in the javax.print.attribute.standard.MediaSizeName API. The default setting is to use North American Letter sized stationary. The value’s case is ignored, e.g. values of iso_a4 and ISO_A4 may be used.

na-letter

String

mediaTray (producer)

Sets MediaTray supported by the javax.print.DocFlavor API, for example upper,middle etc.

String

mimeType (producer)

Sets mimeTypes supported by the javax.print.DocFlavor API.

String

orientation (producer)

Sets the page orientation.

Enum values:

  • portrait

  • landscape

  • reverse-portrait

  • reverse-landscape

portrait

String

printerPrefix (producer)

Sets the prefix name of the printer, it is useful when the printer name does not start with //hostname/printer.

String

sendToPrinter (producer)

etting this option to false prevents sending of the print data to the printer.

true

boolean

sides (producer)

Sets one sided or two sided printing based on the javax.print.attribute.standard.Sides API.

Enum values:

  • one-sided

  • duplex

  • tumble

  • two-sided-short-edge

  • two-sided-long-edge

one-sided

String

Sending Messages to a Printer

Printer Producer

Sending data to the printer is very straightforward and involves creating a producer endpoint that can be sent message exchanges on in route.

Usage Samples

Example 1: Printing text based payloads on a Default printer using letter stationary and one-sided mode

RouteBuilder builder = new RouteBuilder() {
    public void configure() {
       from(file://inputdir/?delete=true)
       .to("lpr://localhost/default?copies=2" +
           "&flavor=DocFlavor.INPUT_STREAM&" +
           "&mimeType=AUTOSENSE" +
           "&mediaSize=NA_LETTER" +
           "&sides=one-sided")
    }};

Example 2: Printing GIF based payloads on a Remote printer using A4 stationary and one-sided mode

RouteBuilder builder = new RouteBuilder() {
    public void configure() {
       from(file://inputdir/?delete=true)
       .to("lpr://remotehost/sales/salesprinter" +
           "?copies=2&sides=one-sided" +
           "&mimeType=GIF&mediaSize=ISO_A4" +
           "&flavor=DocFlavor.INPUT_STREAM")
   }};

Example 3: Printing JPEG based payloads on a Remote printer using Japanese Postcard stationary and one-sided mode

RouteBuilder builder = new RouteBuilder() {
    public void configure() {
       from(file://inputdir/?delete=true)
       .to("lpr://remotehost/sales/salesprinter" +
           "?copies=2&sides=one-sided" +
           "&mimeType=JPEG" +
           "&mediaSize=JAPANESE_POSTCARD" +
           "&flavor=DocFlavor.INPUT_STREAM")
    }};

Spring Boot Auto-Configuration

When using lpr with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-printer-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 3 options, which are listed below.

Name Description Default Type

camel.component.lpr.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.lpr.enabled

Whether to enable auto configuration of the lpr component. This is enabled by default.

Boolean

camel.component.lpr.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean