Pulsar Sink

Provided by: "Apache Software Foundation"

Support Level for this Kamelet is: "Preview"

Send documents to Pulsar.

Configuration Options

The following table summarizes the configuration options available for the pulsar-sink Kamelet:

Property	Name	Description	Type	Default
namespaceName	Pulsar Namespace Name	Required The Pulsar Namespace Name.	string
serviceUrl	Service URL	Required The Pulsar Service URL to point while creating the client from URI.	string
tenant	Tenant Name	Required The Tenant Name.	string
topic	Topic Name	Required The topic name or regexp.	string
topicType	Topic Type	Required The topic type. Possible values are: persistent or non-persistent.	string
authenticationClass	Authentication Class	The Authentication FQCN to be used while creating the client from URI.	string
authenticationParams	Authentication Params	The Authentication Parameters to be used while creating the client from URI.	string
batchingEnabled	Enable Batching	Control whether automatic batching of messages is enabled for the producer.	boolean	true
batchingMaxMessages	Batching Maximum Messages	The maximum size to batch messages.	int	1000
batchingMaxPublishDelayMicros	Batching Maximum Publish Delay in Microsecond	The maximum time period within which the messages sent will be batched if batchingEnabled is true.	long	1000
blockIfQueueFull	Block If Queue Full	Whether to block the producing thread if pending messages queue is full or to throw a ProducerQueueIsFullError.	boolean	false
compressionType	Compression Type	Compression type to use. Possible values are: NONE, LZ4, ZLIB, ZSTD, SNAPPY.	string	NONE
initialSequenceId	Initial SequenceId	The first message published will have a sequence Id of initialSequenceId 1.	long	-1
lazyStartProducer	Number Of Consumer Threads	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	boolean	false
maxPendingMessages	Maximum Pending Messages	Size of the pending massages queue. When the queue is full, by default, any further sends will fail unless blockIfQueueFull=true.	int	1000
maxPendingMessagesAcrossPartitions	Maximum Pending Messages Across Partitions	The maximum number of pending messages for partitioned topics. The maxPendingMessages value will be reduced if (number of partitions maxPendingMessages) exceeds this value. Partitioned topics have a pending message queue for each partition.	int	50000
messageRoutingMode	Message Routing Mode	Message Routing Mode to use. Possible values are SinglePartition, RoundRobinPartition, CustomPartition.	string	RoundRobinPartition
producerName	Producer Name	Name of the producer. If unset, lets Pulsar select a unique identifier.	string
sendTimeoutMs	Send Timeout in Milliseconds	Send timeout in milliseconds.	int	30000

Property

Name

Description

Type

Default

Example

namespaceName

Pulsar Namespace Name

Required The Pulsar Namespace Name.

string

serviceUrl

Service URL

Required The Pulsar Service URL to point while creating the client from URI.

string

tenant

Tenant Name

Required The Tenant Name.

string

topic

Topic Name

Required The topic name or regexp.

string

topicType

Topic Type

Required The topic type. Possible values are: persistent or non-persistent.

string

authenticationClass

Authentication Class

The Authentication FQCN to be used while creating the client from URI.

string

authenticationParams

Authentication Params

The Authentication Parameters to be used while creating the client from URI.

string

batchingEnabled

Enable Batching

Control whether automatic batching of messages is enabled for the producer.

boolean

true

batchingMaxMessages

Batching Maximum Messages

The maximum size to batch messages.

int

1000

batchingMaxPublishDelayMicros

Batching Maximum Publish Delay in Microsecond

The maximum time period within which the messages sent will be batched if batchingEnabled is true.

long

1000

blockIfQueueFull

Block If Queue Full

Whether to block the producing thread if pending messages queue is full or to throw a ProducerQueueIsFullError.

boolean

false

compressionType

Compression Type

Compression type to use. Possible values are: NONE, LZ4, ZLIB, ZSTD, SNAPPY.

string

NONE

initialSequenceId

Initial SequenceId

The first message published will have a sequence Id of initialSequenceId 1.

long

-1

lazyStartProducer

Number Of Consumer Threads

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

boolean

false

maxPendingMessages

Maximum Pending Messages

Size of the pending massages queue. When the queue is full, by default, any further sends will fail unless blockIfQueueFull=true.

int

1000

maxPendingMessagesAcrossPartitions

Maximum Pending Messages Across Partitions

The maximum number of pending messages for partitioned topics. The maxPendingMessages value will be reduced if (number of partitions maxPendingMessages) exceeds this value. Partitioned topics have a pending message queue for each partition.

int

50000

messageRoutingMode

Message Routing Mode

Message Routing Mode to use. Possible values are SinglePartition, RoundRobinPartition, CustomPartition.

string

RoundRobinPartition

producerName

Producer Name

Name of the producer. If unset, lets Pulsar select a unique identifier.

string

sendTimeoutMs

Send Timeout in Milliseconds

Send timeout in milliseconds.

int

30000

Dependencies

At runtime, the pulsar-sink Kamelet relies upon the presence of the following dependencies:

camel:pulsar
camel:kamelet
camel:core

Usage

This section describes how you can use the pulsar-sink.

Knative sink

You can use the pulsar-sink Kamelet as a Knative sink by binding it to a Knative object.

pulsar-sink-binding.yaml

apiVersion: camel.apache.org/v1alpha1
kind: KameletBinding
metadata:
  name: pulsar-sink-binding
spec:
  source:
    ref:
      kind: Channel
      apiVersion: messaging.knative.dev/v1
      name: mychannel
  sink:
    ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: pulsar-sink
    properties:
      namespaceName: The Pulsar Namespace Name
      serviceUrl: The Service URL
      tenant: The Tenant Name
      topic: The Topic Name
      topicType: The Topic Type

Prerequisite

You have Camel K installed on the cluster.

Procedure for using the cluster CLI

Save the pulsar-sink-binding.yaml file to your local drive, and then edit it as needed for your configuration.
Run the sink by using the following command:
```
kubectl apply -f pulsar-sink-binding.yaml
```

Procedure for using the Kamel CLI

Configure and run the sink by using the following command:

kamel bind pulsar-sink -p "sink.namespaceName=The Pulsar Namespace Name" -p "sink.serviceUrl=The Service URL" -p "sink.tenant=The Tenant Name" -p "sink.topic=The Topic Name" -p "sink.topicType=The Topic Type" channel:mychannel

This command creates the KameletBinding in the current namespace on the cluster.

Kafka sink

You can use the pulsar-sink Kamelet as a Kafka sink by binding it to a Kafka topic.

pulsar-sink-binding.yaml

apiVersion: camel.apache.org/v1alpha1
kind: KameletBinding
metadata:
  name: pulsar-sink-binding
spec:
  source:
    ref:
      kind: KafkaTopic
      apiVersion: kafka.strimzi.io/v1beta1
      name: my-topic
  sink:
    ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: pulsar-sink
    properties:
      namespaceName: The Pulsar Namespace Name
      serviceUrl: The Service URL
      tenant: The Tenant Name
      topic: The Topic Name
      topicType: The Topic Type

Prerequisites

You’ve installed Strimzi.
You’ve created a topic named my-topic in the current namespace.
You have Camel K installed on the cluster.

Procedure for using the cluster CLI

Save the pulsar-sink-binding.yaml file to your local drive, and then edit it as needed for your configuration.
Run the sink by using the following command:
```
kubectl apply -f pulsar-sink-binding.yaml
```

Procedure for using the Kamel CLI

Configure and run the sink by using the following command:

kamel bind pulsar-sink -p "sink.namespaceName=The Pulsar Namespace Name" -p "sink.serviceUrl=The Service URL" -p "sink.tenant=The Tenant Name" -p "sink.topic=The Topic Name" -p "sink.topicType=The Topic Type" kafka.strimzi.io/v1beta1:KafkaTopic:my-topic

This command creates the KameletBinding in the current namespace on the cluster.

Kamelet source file

https://github.com/apache/camel-kamelets/blob/v0.6.0/kamelets/pulsar-sink.kamelet.yaml