Google Sheets Stream
Since Camel 2.23
Only consumer is supported
The Google Sheets component provides access to Sheets via the Google Sheets Web APIs.
Google Sheets uses the OAuth 2.0 protocol for authenticating a Google account and authorizing access to user data. Before you can use this component, you will need to create an account and generate OAuth credentials. Credentials comprise of a clientId, clientSecret, and a refreshToken. A handy resource for generating a long-lived refreshToken is the OAuth playground.
In the case of a service account, credentials comprise of a JSON-file (keyResource). You can also use delegation domain-wide authority (delegate) and one, several, or all possible Sheets API Auth Scopes (scopes).
Maven users will need to add the following dependency to their pom.xml for this component:
<dependency>
<groupId>org.apache.camel</groupId>
<artifactId>camel-google-sheets</artifactId>
<!-- use the same version as your Camel core version -->
<version>x.x.x</version>
</dependency>
URI Format
The Google Sheets Component uses the following URI format:
google-sheets-stream://apiName?[options]
Configuring Options
Camel components are configured on two separate levels:
-
component level
-
endpoint level
Configuring Component Options
The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.
Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.
Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.
Configuring Endpoint Options
Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.
Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.
A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.
The following two sections lists all the options, firstly for the component followed by the endpoint.
Component Options
The Google Sheets Stream component supports 18 options, which are listed below.
Name | Description | Default | Type |
---|---|---|---|
Google sheets application name. Example would be camel-google-sheets/1.0. |
String |
||
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
boolean |
|
Client ID of the sheets application. |
String |
||
To use the shared configuration. |
GoogleSheetsStreamConfiguration |
||
Delegate for wide-domain service account. |
String |
||
True if grid data should be returned. |
false |
boolean |
|
Specifies the major dimension that results should use.. Enum values:
|
ROWS |
String |
|
Specify the maximum number of returned results. This will limit the number of rows in a returned value range data set or the number of returned value ranges in a batch request. |
int |
||
Specifies the range of rows and columns in a sheet to get data from. |
String |
||
Specifies the level of permissions you want a sheets application to have to a user account. See https://developers.google.com/identity/protocols/googlescopes for more info. |
List |
||
True if value range result should be split into rows or columns to process each of them individually. When true each row or column is represented with a separate exchange in batch processing. Otherwise value range object is used as exchange junk size. |
false |
boolean |
|
Determines how values should be rendered in the output. Enum values:
|
FORMATTED_VALUE |
String |
|
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
boolean |
|
To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. |
GoogleSheetsClientFactory |
||
OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage. |
String |
||
Client secret of the sheets application. |
String |
||
Sets .json file with credentials for Service account. |
String |
||
OAuth 2 refresh token. Using this, the Google Calendar component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived. |
String |
Endpoint Options
The Google Sheets Stream endpoint is configured using URI syntax:
google-sheets-stream:spreadsheetId
with the following path and query parameters:
Query Parameters (33 parameters)
Name | Description | Default | Type |
---|---|---|---|
Google sheets application name. Example would be camel-google-sheets/1.0. |
String |
||
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
boolean |
|
Client ID of the sheets application. |
String |
||
Delegate for wide-domain service account. |
String |
||
True if grid data should be returned. |
false |
boolean |
|
Specifies the major dimension that results should use.. Enum values:
|
ROWS |
String |
|
Specify the maximum number of returned results. This will limit the number of rows in a returned value range data set or the number of returned value ranges in a batch request. |
int |
||
Specifies the range of rows and columns in a sheet to get data from. |
String |
||
Specifies the level of permissions you want a sheets application to have to a user account. See https://developers.google.com/identity/protocols/googlescopes for more info. |
List |
||
If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. |
false |
boolean |
|
True if value range result should be split into rows or columns to process each of them individually. When true each row or column is represented with a separate exchange in batch processing. Otherwise value range object is used as exchange junk size. |
false |
boolean |
|
Determines how values should be rendered in the output. Enum values:
|
FORMATTED_VALUE |
String |
|
To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
ExceptionHandler |
||
Sets the exchange pattern when the consumer creates an exchange. Enum values:
|
ExchangePattern |
||
A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel. |
PollingConsumerPollStrategy |
||
The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. |
int |
||
The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. |
int |
||
To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. |
int |
||
Milliseconds before the next poll. |
500 |
long |
|
If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. |
false |
boolean |
|
Milliseconds before the first poll starts. |
1000 |
long |
|
Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever. |
0 |
long |
|
The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. Enum values:
|
TRACE |
LoggingLevel |
|
Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. |
ScheduledExecutorService |
||
To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler. |
none |
Object |
|
To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler. |
Map |
||
Whether the scheduler should be auto started. |
true |
boolean |
|
Time unit for initialDelay and delay options. Enum values:
|
MILLISECONDS |
TimeUnit |
|
Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. |
true |
boolean |
|
OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage. |
String |
||
Client secret of the sheets application. |
String |
||
Sets .json file with credentials for Service account. |
String |
||
OAuth 2 refresh token. Using this, the Google Calendar component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived. |
String |
Message Headers
The Google Sheets Stream component supports 6 message header(s), which is/are listed below:
Name | Description | Default | Type |
---|---|---|---|
CamelGoogleSheetsSpreadsheetId (consumer) Constant: |
Specifies the spreadsheet identifier that is used to identify the target to obtain. |
String |
|
CamelGoogleSheetsSpreadsheetUrl (consumer) Constant: |
The URL of the spreadsheet. |
String |
|
CamelGoogleSheetsMajorDimension (consumer) Constant: |
The major dimension of the values. |
String |
|
CamelGoogleSheetsRange (consumer) Constant: |
The range the values cover, in A1 notation. |
String |
|
CamelGoogleSheetsRangeIndex (consumer) Constant: |
The index of the range. |
int |
|
CamelGoogleSheetsValueIndex (consumer) Constant: |
The index of the value. |
int |
More information
For more information on the endpoints and options see API documentation at: https://developers.google.com/sheets/api/reference/rest/
Spring Boot Auto-Configuration
When using google-sheets-stream with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:
<dependency>
<groupId>org.apache.camel.springboot</groupId>
<artifactId>camel-google-sheets-starter</artifactId>
<version>x.x.x</version>
<!-- use the same version as your Camel core version -->
</dependency>
The component supports 34 options, which are listed below.
Name | Description | Default | Type |
---|---|---|---|
OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage. |
String |
||
Google sheets application name. Example would be camel-google-sheets/1.0. |
String |
||
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
|
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
|
To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. The option is a org.apache.camel.component.google.sheets.GoogleSheetsClientFactory type. |
GoogleSheetsClientFactory |
||
Client ID of the sheets application. |
String |
||
Client secret of the sheets application. |
String |
||
To use the shared configuration. The option is a org.apache.camel.component.google.sheets.stream.GoogleSheetsStreamConfiguration type. |
GoogleSheetsStreamConfiguration |
||
Delegate for wide-domain service account. |
String |
||
Whether to enable auto configuration of the google-sheets-stream component. This is enabled by default. |
Boolean |
||
True if grid data should be returned. |
false |
Boolean |
|
Sets .json file with credentials for Service account. |
String |
||
Specifies the major dimension that results should use.. |
ROWS |
String |
|
Specify the maximum number of returned results. This will limit the number of rows in a returned value range data set or the number of returned value ranges in a batch request. |
Integer |
||
Specifies the range of rows and columns in a sheet to get data from. |
String |
||
OAuth 2 refresh token. Using this, the Google Calendar component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived. |
String |
||
Specifies the level of permissions you want a sheets application to have to a user account. See https://developers.google.com/identity/protocols/googlescopes for more info. |
List |
||
True if value range result should be split into rows or columns to process each of them individually. When true each row or column is represented with a separate exchange in batch processing. Otherwise value range object is used as exchange junk size. |
false |
Boolean |
|
Determines how values should be rendered in the output. |
FORMATTED_VALUE |
String |
|
OAuth 2 access token. This typically expires after an hour so refreshToken is recommended for long term usage. |
String |
||
Google Sheets application name. Example would be camel-google-sheets/1.0. |
String |
||
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. |
true |
Boolean |
|
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. |
false |
Boolean |
|
To use the GoogleSheetsClientFactory as factory for creating the client. Will by default use BatchGoogleSheetsClientFactory. The option is a org.apache.camel.component.google.sheets.GoogleSheetsClientFactory type. |
GoogleSheetsClientFactory |
||
Client ID of the sheets application. |
String |
||
Client secret of the sheets application. |
String |
||
To use the shared configuration. The option is a org.apache.camel.component.google.sheets.GoogleSheetsConfiguration type. |
GoogleSheetsConfiguration |
||
Delegate for wide-domain service account. |
String |
||
Whether to enable auto configuration of the google-sheets component. This is enabled by default. |
Boolean |
||
Sets .json file with credentials for Service account. |
String |
||
Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. |
false |
Boolean |
|
OAuth 2 refresh token. Using this, the Google Sheets component can obtain a new accessToken whenever the current one expires - a necessity if the application is long-lived. |
String |
||
Sheets scopes. |
Collection |
||
When consumer return an array or collection this will generate one exchange per element, and their routes will be executed once for each exchange. Set this value to false to use a single exchange for the entire list or array. |
true |
Boolean |