Netty HTTP

Since Camel 2.14

Both producer and consumer are supported

The Netty HTTP component is an extension to Netty component to facilitiate HTTP transport with Netty.

Stream

Netty is stream based, which means the input it receives is submitted to Camel as a stream. That means you will only be able to read the content of the stream once. If you find a situation where the message body appears to be empty or you need to access the data multiple times (eg: doing multicasting, or redelivery error handling) you should use Stream caching or convert the message body to a String which is safe to be re-read multiple times. Notice Netty HTTP reads the entire stream into memory using io.netty.handler.codec.http.HttpObjectAggregator to build the entire full http message. But the resulting message is still a stream based message which is readable once.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-netty-http</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

The URI scheme for a netty component is as follows

netty-http:http://0.0.0.0:8080[?options]

Query parameters vs endpoint options

You may be wondering how Camel recognizes URI query parameters and endpoint options. For example you might create endpoint URI as follows: netty-http:http//example.com?myParam=myValue&compression=true . In this example myParam is the HTTP parameter, while compression is the Camel endpoint option. The strategy used by Camel in such situations is to resolve available endpoint options and remove them from the URI. It means that for the discussed example, the HTTP request sent by Netty HTTP producer to the endpoint will look as follows: http//example.com?myParam=myValue, because compression endpoint option will be resolved and removed from the target URL. Keep also in mind that you cannot specify endpoint options using dynamic headers (like CamelHttpQuery). Endpoint options can be specified only at the endpoint URI definition level (like to or from DSL elements).

A lot more options

This component inherits all the options from Netty, so make sure to look at the Netty documentation as well. Notice that some options from Netty is not applicable when using this Netty HTTP component, such as options related to UDP transport.

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Netty HTTP component supports 77 options, which are listed below.

Name	Description	Default	Type
configuration (common)	To use the NettyConfiguration as configuration when creating endpoints.		NettyConfiguration
disconnect (common)	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	boolean
keepAlive (common)	Setting to ensure socket is not closed due to inactivity.	true	boolean
reuseAddress (common)	Setting to facilitate socket multiplexing.	true	boolean
reuseChannel (common)	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	boolean
sync (common)	Setting to set endpoint as one-way or request-response.	true	boolean
tcpNoDelay (common)	Setting to improve TCP protocol performance.	true	boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
broadcast (consumer)	Setting to choose Multicast over UDP.	false	boolean
clientMode (consumer)	If the clientMode is true, netty consumer will connect the address as a TCP client.	false	boolean
muteException (consumer)	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	boolean
reconnect (consumer)	Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled.	true	boolean
reconnectInterval (consumer)	Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection.	10000	int
backlog (consumer (advanced))	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.		int
bossCount (consumer (advanced))	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty.	1	int
bossGroup (consumer (advanced))	Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint.		EventLoopGroup
disconnectOnNoReply (consumer (advanced))	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	boolean
executorService (consumer (advanced))	To use the given EventExecutorGroup.		EventExecutorGroup
maximumPoolSize (consumer (advanced))	Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.		int
nettyServerBootstrapFactory (consumer (advanced))	To use a custom NettyServerBootstrapFactory.		NettyServerBootstrapFactory
networkInterface (consumer (advanced))	When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.		String
noReplyLogLevel (consumer (advanced))	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. Enum values: TRACE DEBUG INFO WARN ERROR OFF	WARN	LoggingLevel
serverClosedChannelExceptionCaughtLogLevel (consumer (advanced))	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. Enum values: TRACE DEBUG INFO WARN ERROR OFF	DEBUG	LoggingLevel
serverExceptionCaughtLogLevel (consumer (advanced))	If the server (NettyConsumer) catches an exception then its logged using this logging level. Enum values: TRACE DEBUG INFO WARN ERROR OFF	WARN	LoggingLevel
serverInitializerFactory (consumer (advanced))	To use a custom ServerInitializerFactory.		ServerInitializerFactory
usingExecutorService (consumer (advanced))	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	boolean
connectTimeout (producer)	Time to wait for a socket connection to be available. Value is in milliseconds.	10000	int
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
requestTimeout (producer)	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.		long
clientInitializerFactory (producer (advanced))	To use a custom ClientInitializerFactory.		ClientInitializerFactory
correlationManager (producer (advanced))	To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details.		NettyCamelStateCorrelationManager
lazyChannelCreation (producer (advanced))	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	boolean
producerPoolEnabled (producer (advanced))	Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.	true	boolean
producerPoolMaxIdle (producer (advanced))	Sets the cap on the number of idle instances in the pool.	100	int
producerPoolMaxTotal (producer (advanced))	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	int
producerPoolMinEvictableIdle (producer (advanced))	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000	long
producerPoolMinIdle (producer (advanced))	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.		int
udpConnectionlessSending (producer (advanced))	This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.	false	boolean
useByteBuf (producer (advanced))	If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.	false	boolean
hostnameVerification ( security)	To enable/disable hostname verification on SSLEngine.	false	boolean
allowSerializedHeaders (advanced)	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
channelGroup (advanced)	To use a explicit ChannelGroup.		ChannelGroup
headerFilterStrategy (advanced)	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.		HeaderFilterStrategy
nativeTransport (advanced)	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html.	false	boolean
nettyHttpBinding (advanced)	To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.		NettyHttpBinding
options (advanced)	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.		Map
receiveBufferSize (advanced)	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	int
receiveBufferSizePredictor (advanced)	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.		int
sendBufferSize (advanced)	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	int
transferExchange (advanced)	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	boolean
udpByteArrayCodec (advanced)	For UDP only. If enabled the using byte array codec instead of Java serialization protocol.	false	boolean
workerCount (advanced)	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.		int
workerGroup (advanced)	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.		EventLoopGroup
allowDefaultCodec (codec)	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	boolean
autoAppendDelimiter (codec)	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	boolean
decoderMaxLineLength (codec)	The max line length to use for the textline codec.	1024	int
decoders (codec)	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
delimiter (codec)	The delimiter to use for the textline codec. Possible values are LINE and NULL. Enum values: LINE NULL	LINE	TextLineDelimiter
encoders (codec)	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
encoding (codec)	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.		String
textline (codec)	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.	false	boolean
enabledProtocols (security)	Which protocols to enable when using SSL.	TLSv1,TLSv1.1,TLSv1.2	String
keyStoreFile (security)	Client side certificate keystore to be used for encryption.		File
keyStoreFormat (security)	Keystore format to be used for payload encryption. Defaults to JKS if not set.		String
keyStoreResource (security)	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
needClientAuth (security)	Configures whether the server needs client authentication when using SSL.	false	boolean
passphrase (security)	Password setting to use in order to encrypt/decrypt payloads sent using SSH.		String
securityConfiguration (security)	Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.		NettyHttpSecurityConfiguration
securityProvider (security)	Security provider to be used for payload encryption. Defaults to SunX509 if not set.		String
ssl (security)	Setting to specify whether SSL encryption is applied to this endpoint.	false	boolean
sslClientCertHeaders (security)	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	boolean
sslContextParameters (security)	To configure security using SSLContextParameters.		SSLContextParameters
sslHandler (security)	Reference to a class that could be used to return an SSL Handler.		SslHandler
trustStoreFile (security)	Server side certificate keystore to be used for encryption.		File
trustStoreResource (security)	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
useGlobalSslContextParameters (security)	Enable usage of global SSL context parameters.	false	boolean

Name

Description

Default

Type

configuration (common)

To use the NettyConfiguration as configuration when creating endpoints.

NettyConfiguration

disconnect (common)

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

boolean

keepAlive (common)

Setting to ensure socket is not closed due to inactivity.

true

boolean

reuseAddress (common)

Setting to facilitate socket multiplexing.

true

boolean

reuseChannel (common)

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

boolean

sync (common)

Setting to set endpoint as one-way or request-response.

true

boolean

tcpNoDelay (common)

Setting to improve TCP protocol performance.

true

boolean

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

broadcast (consumer)

Setting to choose Multicast over UDP.

false

boolean

clientMode (consumer)

If the clientMode is true, netty consumer will connect the address as a TCP client.

false

boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

boolean

reconnect (consumer)

Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled.

true

boolean

reconnectInterval (consumer)

Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection.

10000

int

backlog (consumer (advanced))

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

int

bossCount (consumer (advanced))

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty.

int

bossGroup (consumer (advanced))

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint.

EventLoopGroup

disconnectOnNoReply (consumer (advanced))

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

boolean

executorService (consumer (advanced))

To use the given EventExecutorGroup.

EventExecutorGroup

maximumPoolSize (consumer (advanced))

Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.

int

nettyServerBootstrapFactory (consumer (advanced))

To use a custom NettyServerBootstrapFactory.

NettyServerBootstrapFactory

networkInterface (consumer (advanced))

When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.

String

noReplyLogLevel (consumer (advanced))

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

WARN

LoggingLevel

serverClosedChannelExceptionCaughtLogLevel (consumer (advanced))

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server.

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

DEBUG

LoggingLevel

serverExceptionCaughtLogLevel (consumer (advanced))

If the server (NettyConsumer) catches an exception then its logged using this logging level.

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

WARN

LoggingLevel

serverInitializerFactory (consumer (advanced))

To use a custom ServerInitializerFactory.

ServerInitializerFactory

usingExecutorService (consumer (advanced))

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

boolean

connectTimeout (producer)

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

int

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

requestTimeout (producer)

Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.

long

clientInitializerFactory (producer (advanced))

To use a custom ClientInitializerFactory.

ClientInitializerFactory

correlationManager (producer (advanced))

To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details.

NettyCamelStateCorrelationManager

lazyChannelCreation (producer (advanced))

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

boolean

producerPoolEnabled (producer (advanced))

Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.

true

boolean

producerPoolMaxIdle (producer (advanced))

Sets the cap on the number of idle instances in the pool.

100

int

producerPoolMaxTotal (producer (advanced))

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

int

producerPoolMinEvictableIdle (producer (advanced))

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000

long

producerPoolMinIdle (producer (advanced))

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

int

udpConnectionlessSending (producer (advanced))

This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.

false

boolean

useByteBuf (producer (advanced))

If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.

false

boolean

hostnameVerification ( security)

To enable/disable hostname verification on SSLEngine.

false

boolean

allowSerializedHeaders (advanced)

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

channelGroup (advanced)

To use a explicit ChannelGroup.

ChannelGroup

headerFilterStrategy (advanced)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.

HeaderFilterStrategy

nativeTransport (advanced)

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html.

false

boolean

nettyHttpBinding (advanced)

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.

NettyHttpBinding

options (advanced)

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

Map

receiveBufferSize (advanced)

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

int

receiveBufferSizePredictor (advanced)

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

int

sendBufferSize (advanced)

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

int

transferExchange (advanced)

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

boolean

udpByteArrayCodec (advanced)

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

boolean

workerCount (advanced)

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

int

workerGroup (advanced)

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

EventLoopGroup

allowDefaultCodec (codec)

The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.

true

boolean

autoAppendDelimiter (codec)

Whether or not to auto append missing end delimiter when sending using the textline codec.

true

boolean

decoderMaxLineLength (codec)

The max line length to use for the textline codec.

1024

int

decoders (codec)

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

String

delimiter (codec)

The delimiter to use for the textline codec. Possible values are LINE and NULL.

Enum values:

LINE
NULL

LINE

TextLineDelimiter

encoders (codec)

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

String

encoding (codec)

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

String

textline (codec)

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.

false

boolean

enabledProtocols (security)

Which protocols to enable when using SSL.

TLSv1,TLSv1.1,TLSv1.2

String

keyStoreFile (security)

Client side certificate keystore to be used for encryption.

File

keyStoreFormat (security)

Keystore format to be used for payload encryption. Defaults to JKS if not set.

String

keyStoreResource (security)

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

needClientAuth (security)

Configures whether the server needs client authentication when using SSL.

false

boolean

passphrase (security)

Password setting to use in order to encrypt/decrypt payloads sent using SSH.

String

securityConfiguration (security)

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.

NettyHttpSecurityConfiguration

securityProvider (security)

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

String

ssl (security)

Setting to specify whether SSL encryption is applied to this endpoint.

false

boolean

sslClientCertHeaders (security)

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

boolean

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

sslHandler (security)

Reference to a class that could be used to return an SSL Handler.

SslHandler

trustStoreFile (security)

Server side certificate keystore to be used for encryption.

File

trustStoreResource (security)

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

Endpoint Options

The Netty HTTP endpoint is configured using URI syntax:

netty-http:protocol://host:port/path

with the following path and query parameters:

Path Parameters (4 parameters)

Name	Description	Type
protocol (common)	Required The protocol to use which is either http, https or proxy - a consumer only option. Enum values: http https	String
host (common)	Required The local hostname such as localhost, or 0.0.0.0 when being a consumer. The remote HTTP server hostname when using producer.	String
port (common)	The host port number.	int
path (common)	Resource path.	String

Name

Description

Default

Type

protocol (common)

Required The protocol to use which is either http, https or proxy - a consumer only option.

Enum values:

http
https

String

host (common)

Required The local hostname such as localhost, or 0.0.0.0 when being a consumer. The remote HTTP server hostname when using producer.

String

port (common)

The host port number.

int

path (common)

Resource path.

String

Query Parameters (80 parameters)

Name	Description	Default	Type
bridgeEndpoint (common)	If the option is true, the producer will ignore the NettyHttpConstants.HTTP_URI header, and use the endpoint’s URI for request. You may also set the throwExceptionOnFailure to be false to let the producer send all the fault response back. The consumer working in the bridge mode will skip the gzip compression and WWW URL form encoding (by adding the Exchange.SKIP_GZIP_ENCODING and Exchange.SKIP_WWW_FORM_URLENCODED headers to the consumed exchange).	false	boolean
disconnect (common)	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	boolean
keepAlive (common)	Setting to ensure socket is not closed due to inactivity.	true	boolean
reuseAddress (common)	Setting to facilitate socket multiplexing.	true	boolean
reuseChannel (common)	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	boolean
sync (common)	Setting to set endpoint as one-way or request-response.	true	boolean
tcpNoDelay (common)	Setting to improve TCP protocol performance.	true	boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
matchOnUriPrefix (consumer)	Whether or not Camel should try to find a target consumer by matching the URI prefix if no exact match is found.	false	boolean
muteException (consumer)	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	boolean
send503whenSuspended (consumer)	Whether to send back HTTP status code 503 when the consumer has been suspended. If the option is false then the Netty Acceptor is unbound when the consumer is suspended, so clients cannot connect anymore.	true	boolean
backlog (consumer (advanced))	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.		int
bossCount (consumer (advanced))	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty.	1	int
bossGroup (consumer (advanced))	Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint.		EventLoopGroup
chunkedMaxContentLength (consumer (advanced))	Value in bytes the max content length per chunked frame received on the Netty HTTP server.	1048576	int
compression (consumer (advanced))	Allow using gzip/deflate for compression on the Netty HTTP server if the client supports it from the HTTP headers.	false	boolean
disconnectOnNoReply (consumer (advanced))	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	boolean
exceptionHandler (consumer (advanced))	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer (advanced))	Sets the exchange pattern when the consumer creates an exchange. Enum values: InOnly InOut InOptionalOut		ExchangePattern
httpMethodRestrict (consumer (advanced))	To disable HTTP methods on the Netty HTTP consumer. You can specify multiple separated by comma.		String
logWarnOnBadRequest (consumer (advanced))	Whether Netty HTTP server should log a WARN if decoding the HTTP request failed and a HTTP Status 400 (bad request) is returned.	true	boolean
mapHeaders (consumer (advanced))	If this option is enabled, then during binding from Netty to Camel Message then the headers will be mapped as well (eg added as header to the Camel Message as well). You can turn off this option to disable this. The headers can still be accessed from the org.apache.camel.component.netty.http.NettyHttpMessage message with the method getHttpRequest() that returns the Netty HTTP request io.netty.handler.codec.http.HttpRequest instance.	true	boolean
maxHeaderSize (consumer (advanced))	The maximum length of all headers. If the sum of the length of each header exceeds this value, a io.netty.handler.codec.TooLongFrameException will be raised.	8192	int
nettyServerBootstrapFactory (consumer (advanced))	To use a custom NettyServerBootstrapFactory.		NettyServerBootstrapFactory
nettySharedHttpServer (consumer (advanced))	To use a shared Netty HTTP server. See Netty HTTP Server Example for more details.		NettySharedHttpServer
noReplyLogLevel (consumer (advanced))	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. Enum values: TRACE DEBUG INFO WARN ERROR OFF	WARN	LoggingLevel
serverClosedChannelExceptionCaughtLogLevel (consumer (advanced))	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. Enum values: TRACE DEBUG INFO WARN ERROR OFF	DEBUG	LoggingLevel
serverExceptionCaughtLogLevel (consumer (advanced))	If the server (NettyConsumer) catches an exception then its logged using this logging level. Enum values: TRACE DEBUG INFO WARN ERROR OFF	WARN	LoggingLevel
serverInitializerFactory (consumer (advanced))	To use a custom ServerInitializerFactory.		ServerInitializerFactory
traceEnabled (consumer (advanced))	Specifies whether to enable HTTP TRACE for this Netty HTTP consumer. By default TRACE is turned off.	false	boolean
urlDecodeHeaders (consumer (advanced))	If this option is enabled, then during binding from Netty to Camel Message then the header values will be URL decoded (eg %20 will be a space character. Notice this option is used by the default org.apache.camel.component.netty.http.NettyHttpBinding and therefore if you implement a custom org.apache.camel.component.netty.http.NettyHttpBinding then you would need to decode the headers accordingly to this option.	false	boolean
usingExecutorService (consumer (advanced))	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	boolean
connectTimeout (producer)	Time to wait for a socket connection to be available. Value is in milliseconds.	10000	int
cookieHandler (producer)	Configure a cookie handler to maintain a HTTP session.		CookieHandler
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
requestTimeout (producer)	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.		long
throwExceptionOnFailure (producer)	Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.	true	boolean
clientInitializerFactory (producer (advanced))	To use a custom ClientInitializerFactory.		ClientInitializerFactory
lazyChannelCreation (producer (advanced))	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	boolean
okStatusCodeRange (producer (advanced))	The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included. The default range is 200-299.	200-299	String
producerPoolEnabled (producer (advanced))	Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.	true	boolean
producerPoolMaxIdle (producer (advanced))	Sets the cap on the number of idle instances in the pool.	100	int
producerPoolMaxTotal (producer (advanced))	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	int
producerPoolMinEvictableIdle (producer (advanced))	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000	long
producerPoolMinIdle (producer (advanced))	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.		int
useRelativePath (producer (advanced))	Sets whether to use a relative path in HTTP requests.	true	boolean
hostnameVerification ( security)	To enable/disable hostname verification on SSLEngine.	false	boolean
allowSerializedHeaders (advanced)	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	boolean
channelGroup (advanced)	To use a explicit ChannelGroup.		ChannelGroup
configuration (advanced)	To use a custom configured NettyHttpConfiguration for configuring this endpoint.		NettyHttpConfiguration
disableStreamCache (advanced)	Determines whether or not the raw input stream from Netty HttpRequest#getContent() or HttpResponset#getContent() is cached or not (Camel will read the stream into a in light-weight memory based Stream caching) cache. By default Camel will cache the Netty input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. Mind that if you enable this option, then you cannot read the Netty stream multiple times out of the box, and you would need manually to reset the reader index on the Netty raw stream. Also Netty will auto-close the Netty stream when the Netty HTTP server/HTTP client is done processing, which means that if the asynchronous routing engine is in use then any asynchronous thread that may continue routing the org.apache.camel.Exchange may not be able to read the Netty stream, because Netty has closed it.	false	boolean
headerFilterStrategy (advanced)	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.		HeaderFilterStrategy
nativeTransport (advanced)	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html.	false	boolean
nettyHttpBinding (advanced)	To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.		NettyHttpBinding
options (advanced)	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.		Map
receiveBufferSize (advanced)	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	int
receiveBufferSizePredictor (advanced)	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.		int
sendBufferSize (advanced)	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	int
synchronous (advanced)	Sets whether synchronous processing should be strictly used.	false	boolean
transferException (advanced)	If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.	false	boolean
transferExchange (advanced)	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	boolean
workerCount (advanced)	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.		int
workerGroup (advanced)	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.		EventLoopGroup
decoders (codec)	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
encoders (codec)	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
enabledProtocols (security)	Which protocols to enable when using SSL.	TLSv1,TLSv1.1,TLSv1.2	String
keyStoreFile (security)	Client side certificate keystore to be used for encryption.		File
keyStoreFormat (security)	Keystore format to be used for payload encryption. Defaults to JKS if not set.		String
keyStoreResource (security)	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
needClientAuth (security)	Configures whether the server needs client authentication when using SSL.	false	boolean
passphrase (security)	Password setting to use in order to encrypt/decrypt payloads sent using SSH.		String
securityConfiguration (security)	Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.		NettyHttpSecurityConfiguration
securityOptions (security)	To configure NettyHttpSecurityConfiguration using key/value pairs from the map.		Map
securityProvider (security)	Security provider to be used for payload encryption. Defaults to SunX509 if not set.		String
ssl (security)	Setting to specify whether SSL encryption is applied to this endpoint.	false	boolean
sslClientCertHeaders (security)	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	boolean
sslContextParameters (security)	To configure security using SSLContextParameters.		SSLContextParameters
sslHandler (security)	Reference to a class that could be used to return an SSL Handler.		SslHandler
trustStoreFile (security)	Server side certificate keystore to be used for encryption.		File
trustStoreResource (security)	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String

Name

Description

Default

Type

bridgeEndpoint (common)

If the option is true, the producer will ignore the NettyHttpConstants.HTTP_URI header, and use the endpoint’s URI for request. You may also set the throwExceptionOnFailure to be false to let the producer send all the fault response back. The consumer working in the bridge mode will skip the gzip compression and WWW URL form encoding (by adding the Exchange.SKIP_GZIP_ENCODING and Exchange.SKIP_WWW_FORM_URLENCODED headers to the consumed exchange).

false

boolean

disconnect (common)

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

boolean

keepAlive (common)

Setting to ensure socket is not closed due to inactivity.

true

boolean

reuseAddress (common)

Setting to facilitate socket multiplexing.

true

boolean

reuseChannel (common)

false

boolean

sync (common)

Setting to set endpoint as one-way or request-response.

true

boolean

tcpNoDelay (common)

Setting to improve TCP protocol performance.

true

boolean

bridgeErrorHandler (consumer)

false

boolean

matchOnUriPrefix (consumer)

Whether or not Camel should try to find a target consumer by matching the URI prefix if no exact match is found.

false

boolean

muteException (consumer)

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

boolean

send503whenSuspended (consumer)

Whether to send back HTTP status code 503 when the consumer has been suspended. If the option is false then the Netty Acceptor is unbound when the consumer is suspended, so clients cannot connect anymore.

true

boolean

backlog (consumer (advanced))

int

bossCount (consumer (advanced))

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty.

int

bossGroup (consumer (advanced))

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint.

EventLoopGroup

chunkedMaxContentLength (consumer (advanced))

Value in bytes the max content length per chunked frame received on the Netty HTTP server.

1048576

int

compression (consumer (advanced))

Allow using gzip/deflate for compression on the Netty HTTP server if the client supports it from the HTTP headers.

false

boolean

disconnectOnNoReply (consumer (advanced))

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

InOnly
InOut
InOptionalOut

ExchangePattern

httpMethodRestrict (consumer (advanced))

To disable HTTP methods on the Netty HTTP consumer. You can specify multiple separated by comma.

String

logWarnOnBadRequest (consumer (advanced))

Whether Netty HTTP server should log a WARN if decoding the HTTP request failed and a HTTP Status 400 (bad request) is returned.

true

boolean

mapHeaders (consumer (advanced))

If this option is enabled, then during binding from Netty to Camel Message then the headers will be mapped as well (eg added as header to the Camel Message as well). You can turn off this option to disable this. The headers can still be accessed from the org.apache.camel.component.netty.http.NettyHttpMessage message with the method getHttpRequest() that returns the Netty HTTP request io.netty.handler.codec.http.HttpRequest instance.

true

boolean

maxHeaderSize (consumer (advanced))

The maximum length of all headers. If the sum of the length of each header exceeds this value, a io.netty.handler.codec.TooLongFrameException will be raised.

8192

int

nettyServerBootstrapFactory (consumer (advanced))

To use a custom NettyServerBootstrapFactory.

NettyServerBootstrapFactory

nettySharedHttpServer (consumer (advanced))

To use a shared Netty HTTP server. See Netty HTTP Server Example for more details.

NettySharedHttpServer

noReplyLogLevel (consumer (advanced))

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

WARN

LoggingLevel

serverClosedChannelExceptionCaughtLogLevel (consumer (advanced))

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

DEBUG

LoggingLevel

serverExceptionCaughtLogLevel (consumer (advanced))

If the server (NettyConsumer) catches an exception then its logged using this logging level.

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

WARN

LoggingLevel

serverInitializerFactory (consumer (advanced))

To use a custom ServerInitializerFactory.

ServerInitializerFactory

traceEnabled (consumer (advanced))

Specifies whether to enable HTTP TRACE for this Netty HTTP consumer. By default TRACE is turned off.

false

boolean

urlDecodeHeaders (consumer (advanced))

If this option is enabled, then during binding from Netty to Camel Message then the header values will be URL decoded (eg %20 will be a space character. Notice this option is used by the default org.apache.camel.component.netty.http.NettyHttpBinding and therefore if you implement a custom org.apache.camel.component.netty.http.NettyHttpBinding then you would need to decode the headers accordingly to this option.

false

boolean

usingExecutorService (consumer (advanced))

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

boolean

connectTimeout (producer)

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

int

cookieHandler (producer)

Configure a cookie handler to maintain a HTTP session.

CookieHandler

lazyStartProducer (producer)

false

boolean

requestTimeout (producer)

long

throwExceptionOnFailure (producer)

Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardless of the HTTP status code.

true

boolean

clientInitializerFactory (producer (advanced))

To use a custom ClientInitializerFactory.

ClientInitializerFactory

lazyChannelCreation (producer (advanced))

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

boolean

okStatusCodeRange (producer (advanced))

The status codes which are considered a success response. The values are inclusive. Multiple ranges can be defined, separated by comma, e.g. 200-204,209,301-304. Each range must be a single number or from-to with the dash included. The default range is 200-299.

200-299

String

producerPoolEnabled (producer (advanced))

true

boolean

producerPoolMaxIdle (producer (advanced))

Sets the cap on the number of idle instances in the pool.

100

int

producerPoolMaxTotal (producer (advanced))

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

int

producerPoolMinEvictableIdle (producer (advanced))

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000

long

producerPoolMinIdle (producer (advanced))

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

int

useRelativePath (producer (advanced))

Sets whether to use a relative path in HTTP requests.

true

boolean

hostnameVerification ( security)

To enable/disable hostname verification on SSLEngine.

false

boolean

allowSerializedHeaders (advanced)

false

boolean

channelGroup (advanced)

To use a explicit ChannelGroup.

ChannelGroup

configuration (advanced)

To use a custom configured NettyHttpConfiguration for configuring this endpoint.

NettyHttpConfiguration

disableStreamCache (advanced)

Determines whether or not the raw input stream from Netty HttpRequest#getContent() or HttpResponset#getContent() is cached or not (Camel will read the stream into a in light-weight memory based Stream caching) cache. By default Camel will cache the Netty input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. Mind that if you enable this option, then you cannot read the Netty stream multiple times out of the box, and you would need manually to reset the reader index on the Netty raw stream. Also Netty will auto-close the Netty stream when the Netty HTTP server/HTTP client is done processing, which means that if the asynchronous routing engine is in use then any asynchronous thread that may continue routing the org.apache.camel.Exchange may not be able to read the Netty stream, because Netty has closed it.

false

boolean

headerFilterStrategy (advanced)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers.

HeaderFilterStrategy

nativeTransport (advanced)

false

boolean

nettyHttpBinding (advanced)

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API.

NettyHttpBinding

options (advanced)

Map

receiveBufferSize (advanced)

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

int

receiveBufferSizePredictor (advanced)

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

int

sendBufferSize (advanced)

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

int

synchronous (advanced)

Sets whether synchronous processing should be strictly used.

false

boolean

transferException (advanced)

If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException. The caused exception is required to be serialized. This is by default turned off. If you enable this then be aware that Java will deserialize the incoming data from the request to Java and that can be a potential security risk.

false

boolean

transferExchange (advanced)

false

boolean

workerCount (advanced)

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

int

workerGroup (advanced)

EventLoopGroup

decoders (codec)

String

encoders (codec)

String

enabledProtocols (security)

Which protocols to enable when using SSL.

TLSv1,TLSv1.1,TLSv1.2

String

keyStoreFile (security)

Client side certificate keystore to be used for encryption.

File

keyStoreFormat (security)

Keystore format to be used for payload encryption. Defaults to JKS if not set.

String

keyStoreResource (security)

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

needClientAuth (security)

Configures whether the server needs client authentication when using SSL.

false

boolean

passphrase (security)

Password setting to use in order to encrypt/decrypt payloads sent using SSH.

String

securityConfiguration (security)

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources.

NettyHttpSecurityConfiguration

securityOptions (security)

To configure NettyHttpSecurityConfiguration using key/value pairs from the map.

Map

securityProvider (security)

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

String

ssl (security)

Setting to specify whether SSL encryption is applied to this endpoint.

false

boolean

sslClientCertHeaders (security)

false

boolean

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

sslHandler (security)

Reference to a class that could be used to return an SSL Handler.

SslHandler

trustStoreFile (security)

Server side certificate keystore to be used for encryption.

File

trustStoreResource (security)

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

Message Headers

The Netty HTTP component supports 13 message header(s), which is/are listed below:

Name Description Default Type

Name	Description	Default	Type
CamelHttpAuthentication (common) Constant: `HTTP_AUTHENTICATION`	If the user was authenticated using HTTP Basic then this header is added with the value Basic.		String
Content-Type (common) Constant: `CONTENT_TYPE`	To set the content-type of the HTTP body. For example: text/plain; charset=UTF-8.		String
connection (common) Constant: `CONNECTION`	The value of the HTTP header connection to use.		String
CamelNettyCloseChannelWhenComplete (common) Constant: `NETTY_CLOSE_CHANNEL_WHEN_COMPLETE`	Indicates whether the channel should be closed after complete.		Boolean
CamelHttpResponseCode (common) Constant: `HTTP_RESPONSE_CODE`	Allows to set the HTTP Status code to use. By default 200 is used for success, and 500 for failure.		Integer
CamelHttpProtocolVersion (common) Constant: `HTTP_PROTOCOL_VERSION`	The version of the HTTP protocol.	HTTP/1.1	String
CamelHttpMethod (common) Constant: `HTTP_METHOD`	The HTTP method used, such as GET, POST, TRACE etc.	GET	String
CamelHttpQuery (common) Constant: `HTTP_QUERY`	Any query parameters, such as foo=bar&beer=yes.		String
CamelHttpPath (common) Constant: `HTTP_PATH`	Allows to provide URI context-path and query parameters as a String value that overrides the endpoint configuration. This allows to reuse the same producer for calling same remote http server, but using a dynamic context-path and query parameters.		String
CamelHttpRawQuery (common) Constant: `HTTP_RAW_QUERY`	Any query parameters, such as foo=bar&beer=yes. Stored in the raw form, as they arrived to the consumer (i.e. before URL decoding).		String
CamelHttpUrl (common) Constant: `HTTP_URL`	The URL including protocol, host and port, etc: http://0.0.0.0:8080/myapp.		String
CamelHttpCharacterEncoding (common) Constant: `HTTP_CHARACTER_ENCODING`	The charset from the content-type header.		String
CamelHttpUri (common) Constant: `HTTP_URI`	The URI without protocol, host and port, etc: /myapp.		String

CamelHttpAuthentication (common)

Constant: HTTP_AUTHENTICATION

If the user was authenticated using HTTP Basic then this header is added with the value Basic.

String

Content-Type (common)

Constant: CONTENT_TYPE

To set the content-type of the HTTP body. For example: text/plain; charset=UTF-8.

String

connection (common)

Constant: CONNECTION

The value of the HTTP header connection to use.

String

CamelNettyCloseChannelWhenComplete (common)

Constant: NETTY_CLOSE_CHANNEL_WHEN_COMPLETE

Indicates whether the channel should be closed after complete.

Boolean

CamelHttpResponseCode (common)

Constant: HTTP_RESPONSE_CODE

Allows to set the HTTP Status code to use. By default 200 is used for success, and 500 for failure.

Integer

CamelHttpProtocolVersion (common)

Constant: HTTP_PROTOCOL_VERSION

The version of the HTTP protocol.

HTTP/1.1

String

CamelHttpMethod (common)

Constant: HTTP_METHOD

The HTTP method used, such as GET, POST, TRACE etc.

GET

String

CamelHttpQuery (common)

Constant: HTTP_QUERY

Any query parameters, such as foo=bar&beer=yes.

String

CamelHttpPath (common)

Constant: HTTP_PATH

Allows to provide URI context-path and query parameters as a String value that overrides the endpoint configuration. This allows to reuse the same producer for calling same remote http server, but using a dynamic context-path and query parameters.

String

CamelHttpRawQuery (common)

Constant: HTTP_RAW_QUERY

Any query parameters, such as foo=bar&beer=yes. Stored in the raw form, as they arrived to the consumer (i.e. before URL decoding).

String

CamelHttpUrl (common)

Constant: HTTP_URL

The URL including protocol, host and port, etc: http://0.0.0.0:8080/myapp.

String

CamelHttpCharacterEncoding (common)

Constant: HTTP_CHARACTER_ENCODING

The charset from the content-type header.

String

CamelHttpUri (common)

Constant: HTTP_URI

The URI without protocol, host and port, etc: /myapp.

String

Access to Netty types

This component uses the org.apache.camel.component.netty.http.NettyHttpMessage as the message implementation on the Exchange. This allows end users to get access to the original Netty request/response instances if needed, as shown below. Mind that the original response may not be accessible at all times.

io.netty.handler.codec.http.HttpRequest request = exchange.getIn(NettyHttpMessage.class).getHttpRequest();

Examples

In the route below we use Netty HTTP as a HTTP server, which returns back a hardcoded "Bye World" message.

    from("netty-http:http://0.0.0.0:8080/foo")
      .transform().constant("Bye World");

And we can call this HTTP server using Camel also, with the ProducerTemplate as shown below:

    String out = template.requestBody("netty-http:http://0.0.0.0:8080/foo", "Hello World", String.class);
    System.out.println(out);

And we get back "Bye World" as the output.

How do I let Netty match wildcards

By default Netty HTTP will only match on exact uri’s. But you can instruct Netty to match prefixes. For example

from("netty-http:http://0.0.0.0:8123/foo").to("mock:foo");

In the route above Netty HTTP will only match if the uri is an exact match, so it will match if you enter
http://0.0.0.0:8123/foo but not match if you do http://0.0.0.0:8123/foo/bar.

So if you want to enable wildcard matching you do as follows:

from("netty-http:http://0.0.0.0:8123/foo?matchOnUriPrefix=true").to("mock:foo");

So now Netty matches any endpoints with starts with foo.

To match any endpoint you can do:

from("netty-http:http://0.0.0.0:8123?matchOnUriPrefix=true").to("mock:foo");

Using multiple routes with same port

In the same CamelContext you can have multiple routes from Netty HTTP that shares the same port (eg a io.netty.bootstrap.ServerBootstrap instance). Doing this requires a number of bootstrap options to be identical in the routes, as the routes will share the same io.netty.bootstrap.ServerBootstrap instance. The instance will be configured with the options from the first route created.

The options the routes must be identical configured is all the options defined in the org.apache.camel.component.netty.NettyServerBootstrapConfiguration configuration class. If you have configured another route with different options, Camel will throw an exception on startup, indicating the options is not identical. To mitigate this ensure all options is identical.

Here is an example with two routes that share the same port.

Two routes sharing the same port

from("netty-http:http://0.0.0.0:{{port}}/foo")
  .to("mock:foo")
  .transform().constant("Bye World");

from("netty-http:http://0.0.0.0:{{port}}/bar")
  .to("mock:bar")
  .transform().constant("Bye Camel");

And here is an example of a mis configured 2nd route that do not have identical org.apache.camel.component.netty.NettyServerBootstrapConfiguration option as the 1st route. This will cause Camel to fail on startup.

Two routes sharing the same port, but the 2nd route is misconfigured and will fail on starting

from("netty-http:http://0.0.0.0:{{port}}/foo")
  .to("mock:foo")
  .transform().constant("Bye World");

// we cannot have a 2nd route on same port with SSL enabled, when the 1st route is NOT
from("netty-http:http://0.0.0.0:{{port}}/bar?ssl=true")
  .to("mock:bar")
  .transform().constant("Bye Camel");

Reusing same server bootstrap configuration with multiple routes

By configuring the common server bootstrap option in an single instance of a org.apache.camel.component.netty.NettyServerBootstrapConfiguration type, we can use the bootstrapConfiguration option on the Netty HTTP consumers to refer and reuse the same options across all consumers.

<bean id="nettyHttpBootstrapOptions" class="org.apache.camel.component.netty.NettyServerBootstrapConfiguration">
  <property name="backlog" value="200"/>
  <property name="connectionTimeout" value="20000"/>
  <property name="workerCount" value="16"/>
</bean>

And in the routes you refer to this option as shown below

<route>
  <from uri="netty-http:http://0.0.0.0:{{port}}/foo?bootstrapConfiguration=#nettyHttpBootstrapOptions"/>
  ...
</route>

<route>
  <from uri="netty-http:http://0.0.0.0:{{port}}/bar?bootstrapConfiguration=#nettyHttpBootstrapOptions"/>
  ...
</route>

<route>
  <from uri="netty-http:http://0.0.0.0:{{port}}/beer?bootstrapConfiguration=#nettyHttpBootstrapOptions"/>
  ...
</route>

Reusing same server bootstrap configuration with multiple routes across multiple bundles in OSGi container

See the Netty HTTP Server Example for more details and example how to do that.

Implementing a reverse proxy

Netty HTTP component can act as a reverse proxy, in that case Exchange.HTTP_SCHEME, Exchange.HTTP_HOST and Exchange.HTTP_PORT headers are populated from the absolute URL received on the request line of the HTTP request.

Here’s an example of a HTTP proxy that simply transforms the response from the origin server to uppercase.

from("netty-http:proxy://0.0.0.0:8080")
    .toD("netty-http:"
        + "${headers." + Exchange.HTTP_SCHEME + "}://"
        + "${headers." + Exchange.HTTP_HOST + "}:"
        + "${headers." + Exchange.HTTP_PORT + "}")
    .process(this::processResponse);

void processResponse(final Exchange exchange) {
    final NettyHttpMessage message = exchange.getIn(NettyHttpMessage.class);
    final FullHttpResponse response = message.getHttpResponse();

    final ByteBuf buf = response.content();
    final String string = buf.toString(StandardCharsets.UTF_8);

    buf.resetWriterIndex();
    ByteBufUtil.writeUtf8(buf, string.toUpperCase(Locale.US));
}

Using HTTP Basic Authentication

The Netty HTTP consumer supports HTTP basic authentication by specifying the security realm name to use, as shown below

<route>
   <from uri="netty-http:http://0.0.0.0:{{port}}/foo?securityConfiguration.realm=karaf"/>
   ...
</route>

The realm name is mandatory to enable basic authentication. By default the JAAS based authenticator is used, which will use the realm name specified (karaf in the example above) and use the JAAS realm and the JAAS \{{LoginModule}}s of this realm for authentication.

End user of Apache Karaf / ServiceMix has a karaf realm out of the box, and hence why the example above would work out of the box in these containers.

Specifying ACL on web resources

The org.apache.camel.component.netty.http.SecurityConstraint allows to define constrains on web resources. And the org.apache.camel.component.netty.http.SecurityConstraintMapping is provided out of the box, allowing to easily define inclusions and exclusions with roles.

For example as shown below in the XML DSL, we define the constraint bean:

  <bean id="constraint" class="org.apache.camel.component.netty.http.SecurityConstraintMapping">
    <!-- inclusions defines url -> roles restrictions -->
    <!-- a * should be used for any role accepted (or even no roles) -->
    <property name="inclusions">
      <map>
        <entry key="/*" value="*"/>
        <entry key="/admin/*" value="admin"/>
        <entry key="/guest/*" value="admin,guest"/>
      </map>
    </property>
    <!-- exclusions is used to define public urls, which requires no authentication -->
    <property name="exclusions">
      <set>
        <value>/public/*</value>
      </set>
    </property>
  </bean>

The constraint above is define so that

access to /* is restricted and any roles is accepted (also if user has no roles)
access to /admin/* requires the admin role
access to /guest/* requires the admin or guest role
access to /public/* is an exclusion which means no authentication is needed, and is therefore public for everyone without logging in

To use this constraint we just need to refer to the bean id as shown below:

<route>
   <from uri="netty-http:http://0.0.0.0:{{port}}/foo?matchOnUriPrefix=true&amp;securityConfiguration.realm=karaf&amp;securityConfiguration.securityConstraint=#constraint"/>
   ...
</route>

Spring Boot Auto-Configuration

When using netty-http with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-netty-http-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 64 options, which are listed below.

Name	Description	Default	Type
camel.component.netty-http.allow-serialized-headers	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	Boolean
camel.component.netty-http.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.netty-http.backlog	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.		Integer
camel.component.netty-http.boss-count	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty.	1	Integer
camel.component.netty-http.boss-group	Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint. The option is a io.netty.channel.EventLoopGroup type.		EventLoopGroup
camel.component.netty-http.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.netty-http.channel-group	To use a explicit ChannelGroup. The option is a io.netty.channel.group.ChannelGroup type.		ChannelGroup
camel.component.netty-http.client-initializer-factory	To use a custom ClientInitializerFactory. The option is a org.apache.camel.component.netty.ClientInitializerFactory type.		ClientInitializerFactory
camel.component.netty-http.configuration	To use the NettyConfiguration as configuration when creating endpoints. The option is a org.apache.camel.component.netty.NettyConfiguration type.		NettyConfiguration
camel.component.netty-http.connect-timeout	Time to wait for a socket connection to be available. Value is in milliseconds.	10000	Integer
camel.component.netty-http.correlation-manager	To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details. The option is a org.apache.camel.component.netty.NettyCamelStateCorrelationManager type.		NettyCamelStateCorrelationManager
camel.component.netty-http.decoders	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
camel.component.netty-http.disconnect	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	Boolean
camel.component.netty-http.disconnect-on-no-reply	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	Boolean
camel.component.netty-http.enabled	Whether to enable auto configuration of the netty-http component. This is enabled by default.		Boolean
camel.component.netty-http.enabled-protocols	Which protocols to enable when using SSL.	TLSv1,TLSv1.1,TLSv1.2	String
camel.component.netty-http.encoders	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
camel.component.netty-http.executor-service	To use the given EventExecutorGroup. The option is a io.netty.util.concurrent.EventExecutorGroup type.		EventExecutorGroup
camel.component.netty-http.header-filter-strategy	To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers. The option is a org.apache.camel.spi.HeaderFilterStrategy type.		HeaderFilterStrategy
camel.component.netty-http.hostname-verification	To enable/disable hostname verification on SSLEngine.	false	Boolean
camel.component.netty-http.keep-alive	Setting to ensure socket is not closed due to inactivity.	true	Boolean
camel.component.netty-http.key-store-file	Client side certificate keystore to be used for encryption.		File
camel.component.netty-http.key-store-format	Keystore format to be used for payload encryption. Defaults to JKS if not set.		String
camel.component.netty-http.key-store-resource	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
camel.component.netty-http.lazy-channel-creation	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	Boolean
camel.component.netty-http.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.netty-http.maximum-pool-size	Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.		Integer
camel.component.netty-http.mute-exception	If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.	false	Boolean
camel.component.netty-http.native-transport	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html.	false	Boolean
camel.component.netty-http.need-client-auth	Configures whether the server needs client authentication when using SSL.	false	Boolean
camel.component.netty-http.netty-http-binding	To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API. The option is a org.apache.camel.component.netty.http.NettyHttpBinding type.		NettyHttpBinding
camel.component.netty-http.netty-server-bootstrap-factory	To use a custom NettyServerBootstrapFactory. The option is a org.apache.camel.component.netty.NettyServerBootstrapFactory type.		NettyServerBootstrapFactory
camel.component.netty-http.no-reply-log-level	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.		LoggingLevel
camel.component.netty-http.options	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.		Map
camel.component.netty-http.passphrase	Password setting to use in order to encrypt/decrypt payloads sent using SSH.		String
camel.component.netty-http.producer-pool-enabled	Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details.	true	Boolean
camel.component.netty-http.producer-pool-max-idle	Sets the cap on the number of idle instances in the pool.	100	Integer
camel.component.netty-http.producer-pool-max-total	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	Integer
camel.component.netty-http.producer-pool-min-evictable-idle	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000	Long
camel.component.netty-http.producer-pool-min-idle	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.		Integer
camel.component.netty-http.receive-buffer-size	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	Integer
camel.component.netty-http.receive-buffer-size-predictor	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.		Integer
camel.component.netty-http.request-timeout	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.		Long
camel.component.netty-http.reuse-address	Setting to facilitate socket multiplexing.	true	Boolean
camel.component.netty-http.reuse-channel	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	Boolean
camel.component.netty-http.security-configuration	Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources. The option is a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration type.		NettyHttpSecurityConfiguration
camel.component.netty-http.security-provider	Security provider to be used for payload encryption. Defaults to SunX509 if not set.		String
camel.component.netty-http.send-buffer-size	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	Integer
camel.component.netty-http.server-closed-channel-exception-caught-log-level	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server.		LoggingLevel
camel.component.netty-http.server-exception-caught-log-level	If the server (NettyConsumer) catches an exception then its logged using this logging level.		LoggingLevel
camel.component.netty-http.server-initializer-factory	To use a custom ServerInitializerFactory. The option is a org.apache.camel.component.netty.ServerInitializerFactory type.		ServerInitializerFactory
camel.component.netty-http.ssl	Setting to specify whether SSL encryption is applied to this endpoint.	false	Boolean
camel.component.netty-http.ssl-client-cert-headers	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	Boolean
camel.component.netty-http.ssl-context-parameters	To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.		SSLContextParameters
camel.component.netty-http.ssl-handler	Reference to a class that could be used to return an SSL Handler. The option is a io.netty.handler.ssl.SslHandler type.		SslHandler
camel.component.netty-http.sync	Setting to set endpoint as one-way or request-response.	true	Boolean
camel.component.netty-http.tcp-no-delay	Setting to improve TCP protocol performance.	true	Boolean
camel.component.netty-http.transfer-exchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	Boolean
camel.component.netty-http.trust-store-file	Server side certificate keystore to be used for encryption.		File
camel.component.netty-http.trust-store-resource	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
camel.component.netty-http.use-global-ssl-context-parameters	Enable usage of global SSL context parameters.	false	Boolean
camel.component.netty-http.using-executor-service	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	Boolean
camel.component.netty-http.worker-count	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.		Integer
camel.component.netty-http.worker-group	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads. The option is a io.netty.channel.EventLoopGroup type.		EventLoopGroup

Name

Description

Default

Type

camel.component.netty-http.allow-serialized-headers

false

Boolean

camel.component.netty-http.autowired-enabled

true

Boolean

camel.component.netty-http.backlog

Integer

camel.component.netty-http.boss-count

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty.

Integer

camel.component.netty-http.boss-group

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint. The option is a io.netty.channel.EventLoopGroup type.

EventLoopGroup

camel.component.netty-http.bridge-error-handler

false

Boolean

camel.component.netty-http.channel-group

To use a explicit ChannelGroup. The option is a io.netty.channel.group.ChannelGroup type.

ChannelGroup

camel.component.netty-http.client-initializer-factory

To use a custom ClientInitializerFactory. The option is a org.apache.camel.component.netty.ClientInitializerFactory type.

ClientInitializerFactory

camel.component.netty-http.configuration

To use the NettyConfiguration as configuration when creating endpoints. The option is a org.apache.camel.component.netty.NettyConfiguration type.

NettyConfiguration

camel.component.netty-http.connect-timeout

Time to wait for a socket connection to be available. Value is in milliseconds.

10000

Integer

camel.component.netty-http.correlation-manager

NettyCamelStateCorrelationManager

camel.component.netty-http.decoders

String

camel.component.netty-http.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

Boolean

camel.component.netty-http.disconnect-on-no-reply

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

Boolean

camel.component.netty-http.enabled

Whether to enable auto configuration of the netty-http component. This is enabled by default.

Boolean

camel.component.netty-http.enabled-protocols

Which protocols to enable when using SSL.

TLSv1,TLSv1.1,TLSv1.2

String

camel.component.netty-http.encoders

String

camel.component.netty-http.executor-service

To use the given EventExecutorGroup. The option is a io.netty.util.concurrent.EventExecutorGroup type.

EventExecutorGroup

camel.component.netty-http.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter headers. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.netty-http.hostname-verification

To enable/disable hostname verification on SSLEngine.

false

Boolean

camel.component.netty-http.keep-alive

Setting to ensure socket is not closed due to inactivity.

true

Boolean

camel.component.netty-http.key-store-file

Client side certificate keystore to be used for encryption.

File

camel.component.netty-http.key-store-format

Keystore format to be used for payload encryption. Defaults to JKS if not set.

String

camel.component.netty-http.key-store-resource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

camel.component.netty-http.lazy-channel-creation

Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.

true

Boolean

camel.component.netty-http.lazy-start-producer

false

Boolean

camel.component.netty-http.maximum-pool-size

Integer

camel.component.netty-http.mute-exception

If enabled and an Exchange failed processing on the consumer side the response’s body won’t contain the exception’s stack trace.

false

Boolean

camel.component.netty-http.native-transport

false

Boolean

camel.component.netty-http.need-client-auth

Configures whether the server needs client authentication when using SSL.

false

Boolean

camel.component.netty-http.netty-http-binding

To use a custom org.apache.camel.component.netty.http.NettyHttpBinding for binding to/from Netty and Camel Message API. The option is a org.apache.camel.component.netty.http.NettyHttpBinding type.

NettyHttpBinding

camel.component.netty-http.netty-server-bootstrap-factory

To use a custom NettyServerBootstrapFactory. The option is a org.apache.camel.component.netty.NettyServerBootstrapFactory type.

NettyServerBootstrapFactory

camel.component.netty-http.no-reply-log-level

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.

LoggingLevel

camel.component.netty-http.options

Map

camel.component.netty-http.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH.

String

camel.component.netty-http.producer-pool-enabled

true

Boolean

camel.component.netty-http.producer-pool-max-idle

Sets the cap on the number of idle instances in the pool.

100

Integer

camel.component.netty-http.producer-pool-max-total

Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.

-1

Integer

camel.component.netty-http.producer-pool-min-evictable-idle

Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.

300000

Long

camel.component.netty-http.producer-pool-min-idle

Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.

Integer

camel.component.netty-http.receive-buffer-size

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

Integer

camel.component.netty-http.receive-buffer-size-predictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

Integer

camel.component.netty-http.request-timeout

Long

camel.component.netty-http.reuse-address

Setting to facilitate socket multiplexing.

true

Boolean

camel.component.netty-http.reuse-channel

false

Boolean

camel.component.netty-http.security-configuration

Refers to a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration for configuring secure web resources. The option is a org.apache.camel.component.netty.http.NettyHttpSecurityConfiguration type.

NettyHttpSecurityConfiguration

camel.component.netty-http.security-provider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

String

camel.component.netty-http.send-buffer-size

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

Integer

camel.component.netty-http.server-closed-channel-exception-caught-log-level

LoggingLevel

camel.component.netty-http.server-exception-caught-log-level

If the server (NettyConsumer) catches an exception then its logged using this logging level.

LoggingLevel

camel.component.netty-http.server-initializer-factory

To use a custom ServerInitializerFactory. The option is a org.apache.camel.component.netty.ServerInitializerFactory type.

ServerInitializerFactory

camel.component.netty-http.ssl

Setting to specify whether SSL encryption is applied to this endpoint.

false

Boolean

camel.component.netty-http.ssl-client-cert-headers

false

Boolean

camel.component.netty-http.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.netty-http.ssl-handler

Reference to a class that could be used to return an SSL Handler. The option is a io.netty.handler.ssl.SslHandler type.

SslHandler

camel.component.netty-http.sync

Setting to set endpoint as one-way or request-response.

true

Boolean

camel.component.netty-http.tcp-no-delay

Setting to improve TCP protocol performance.

true

Boolean

camel.component.netty-http.transfer-exchange

false

Boolean

camel.component.netty-http.trust-store-file

Server side certificate keystore to be used for encryption.

File

camel.component.netty-http.trust-store-resource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

String

camel.component.netty-http.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.netty-http.using-executor-service

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

Boolean

camel.component.netty-http.worker-count

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

Integer

camel.component.netty-http.worker-group

EventLoopGroup