Stomp

Since Camel 2.12

Both producer and consumer are supported

The Stomp component is used for communicating with Stomp compliant message brokers, like Apache ActiveMQ or ActiveMQ Apollo

Note: Since STOMP specification is not actively maintained, please note STOMP JMS client is not as well actively maintained. However, we hope for the community to step up to help on maintaining the STOMP JMS project in the near future.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-stomp</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

stomp:queue:destination[?options]

Where destination is the name of the queue.

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL as a type safe way of configuring endpoints.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The Stomp component supports 13 options, which are listed below.

Name Description Default Type

brokerURL (common)

Required The URI of the Stomp broker to connect to.

tcp://localhost:61613

String

customHeaders (common)

To set custom headers.

Properties

host (common)

The virtual host name.

String

version (common)

The stomp version (1.1, or 1.2).

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

configuration (advanced)

Component configuration.

StompConfiguration

headerFilterStrategy (filter)

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

login (security)

The username.

String

passcode (security)

The password.

String

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

Endpoint Options

The Stomp endpoint is configured using URI syntax:

stomp:destination

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

destination (common)

Required Name of the queue.

String

Query Parameters (12 parameters)

Name Description Default Type

brokerURL (common)

Required The URI of the Stomp broker to connect to.

tcp://localhost:61613

String

customHeaders (common)

To set custom headers.

Properties

host (common)

The virtual host name.

String

version (common)

The stomp version (1.1, or 1.2).

String

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

  • InOptionalOut

ExchangePattern

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

headerFilterStrategy (advanced)

To use a custom HeaderFilterStrategy to filter header to and from Camel message.

HeaderFilterStrategy

login (security)

The username.

String

passcode (security)

The password.

String

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

Samples

Sending messages:

from("direct:foo").to("stomp:queue:test");

Consuming messages:

from("stomp:queue:test").transform(body().convertToString()).to("mock:result")

Endpoints

Camel supports the Message Endpoint pattern using the Endpoint interface. Endpoints are usually created by a Component and Endpoints are usually referred to in the DSL via their URIs.

From an Endpoint you can use the following methods

* createProducer() will create a Producer for sending message exchanges to the endpoint * createConsumer() implements the Event Driven Consumer pattern for consuming message exchanges from the endpoint via a Processor when creating a Consumer * createPollingConsumer() implements the Polling Consumer pattern for consuming message exchanges from the endpoint via a PollingConsumer

Spring Boot Auto-Configuration

When using stomp with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-stomp-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 14 options, which are listed below.

Name Description Default Type

camel.component.stomp.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.stomp.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.stomp.broker-url

The URI of the Stomp broker to connect to.

tcp://localhost:61613

String

camel.component.stomp.configuration

Component configuration. The option is a org.apache.camel.component.stomp.StompConfiguration type.

StompConfiguration

camel.component.stomp.custom-headers

To set custom headers. The option is a java.util.Properties type.

Properties

camel.component.stomp.enabled

Whether to enable auto configuration of the stomp component. This is enabled by default.

Boolean

camel.component.stomp.header-filter-strategy

To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter header to and from Camel message. The option is a org.apache.camel.spi.HeaderFilterStrategy type.

HeaderFilterStrategy

camel.component.stomp.host

The virtual host name.

String

camel.component.stomp.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.stomp.login

The username.

String

camel.component.stomp.passcode

The password.

String

camel.component.stomp.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.stomp.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean

camel.component.stomp.version

The stomp version (1.1, or 1.2).

String
Back to top