Debezium MongoDB Connector

Since Camel 3.0

Only consumer is supported

The Debezium MongoDB component is wrapper around Debezium using Debezium Embedded, which enables Change Data Capture from MongoDB database using Debezium without the need for Kafka or Kafka Connect.

Note: The Debezium MongoDB connector uses MongoDB’s oplog to capture the changes, so the connector works only with MongoDB replica sets or with sharded clusters where each shard is a separate replica set, therefore you will need to have your MongoDB instance running either in replica set mode or sharded clusters mode.

Note on handling failures: Per Debezium Embedded Engine documentation, the engines is actively recording source offsets and periodically flushes these offsets to a persistent storage, so when the application is restarted or crashed, the engine will resume from the last recorded offset. Thus, at normal operation, your downstream routes will receive each event exactly once, however in case of an application crash (not having a graceful shutdown), the application will resume from the last recorded offset, which may result in receiving duplicate events immediately after the restart. Therefore, your downstream routes should be tolerant enough of such case and deduplicate events if needed.

Note: The Debezium Mongodb component is currently not supported in OSGi

Maven users will need to add the following dependency to their pom.xml for this component.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-debezium-mongodb</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

debezium-mongodb:name[?options]

Options

The Debezium MongoDB Connector component supports 58 options, which are listed below.

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=\http://localhost:8811/avro

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

configuration (consumer)

Allow pre-configured Configurations to be set.

MongoDbConnectorEmbeddedDebeziumConfiguration

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

io.debezium.embedded.spi.OffsetCommitPolicy.PeriodicCommitOffsetPolicy

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

5s

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

60s

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

collectionExcludeList (mongodb)

A comma-separated list of regular expressions that match the collection names for which changes are to be excluded

String

collectionIncludeList (mongodb)

A comma-separated list of regular expressions that match the collection names for which changes are to be captured

String

connectBackoffInitialDelayMs (mongodb)

The initial delay when trying to reconnect to a primary after a connection cannot be made or when no primary is available, given in milliseconds. Defaults to 1 second (1,000 ms).

1s

long

connectBackoffMaxDelayMs (mongodb)

The maximum delay when trying to reconnect to a primary after a connection cannot be made or when no primary is available, given in milliseconds. Defaults to 120 second (120,000 ms).

2m

long

connectMaxAttempts (mongodb)

Maximum number of failed connection attempts to a replica set primary before an exception occurs and task is aborted. Defaults to 16, which with the defaults for 'connect.backoff.initial.delay.ms' and 'connect.backoff.max.delay.ms' results in just over 20 minutes of attempts before failing.

16

int

converters (mongodb)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'

String

databaseExcludeList (mongodb)

A comma-separated list of regular expressions that match the database names for which changes are to be excluded

String

databaseHistoryFileFilename (mongodb)

The path to the file that will be used to record the database history

String

databaseIncludeList (mongodb)

A comma-separated list of regular expressions that match the database names for which changes are to be captured

String

eventProcessingFailureHandling​Mode (mongodb)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped.

fail

String

fieldExcludeList (mongodb)

A comma-separated list of the fully-qualified names of fields that should be excluded from change event message values

String

fieldRenames (mongodb)

Description is not available here, please check Debezium website for corresponding key 'field.renames' description.

String

heartbeatIntervalMs (mongodb)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

0ms

int

heartbeatTopicsPrefix (mongodb)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

maxBatchSize (mongodb)

Maximum size of each batch of source records. Defaults to 2048.

2048

int

maxQueueSize (mongodb)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

int

maxQueueSizeInBytes (mongodb)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled

0

long

mongodbAuthsource (mongodb)

Database containing user credentials.

admin

String

mongodbConnectTimeoutMs (mongodb)

The connection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

int

mongodbHosts (mongodb)

The hostname and port pairs (in the form 'host' or 'host:port') of the MongoDB server(s) in the replica set.

String

mongodbMembersAutoDiscover (mongodb)

Specifies whether the addresses in 'hosts' are seeds that should be used to discover all members of the cluster or replica set ('true'), or whether the address(es) in 'hosts' should be used as is ('false'). The default is 'true'.

true

boolean

mongodbName (mongodb)

Required Unique name that identifies the MongoDB replica set or cluster and all recorded offsets, andthat is used as a prefix for all schemas and topics. Each distinct MongoDB installation should have a separate namespace and monitored by at most one Debezium connector.

String

mongodbPassword (mongodb)

Required Password to be used when connecting to MongoDB, if necessary.

String

mongodbPollIntervalMs (mongodb)

Interval for looking for new, removed, or changed replica sets, given in milliseconds. Defaults to 30 seconds (30,000 ms).

30s

long

mongodbServerSelectionTimeout​Ms (mongodb)

The server selection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

30s

int

mongodbSocketTimeoutMs (mongodb)

The socket timeout, given in milliseconds. Defaults to 0 ms.

0ms

int

mongodbSslEnabled (mongodb)

Should connector use SSL to connect to MongoDB instances

false

boolean

mongodbSslInvalidHostname​Allowed (mongodb)

Whether invalid host names are allowed when using SSL. If true the connection will not prevent man-in-the-middle attacks

false

boolean

mongodbUser (mongodb)

Database user for connecting to MongoDB, if necessary.

String

pollIntervalMs (mongodb)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

500ms

long

provideTransactionMetadata (mongodb)

Enables transaction metadata extraction together with event counting

false

boolean

queryFetchSize (mongodb)

The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size.

0

int

retriableRestartConnectorWait​Ms (mongodb)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

10s

long

sanitizeFieldNames (mongodb)

Whether field names will be sanitized to Avro naming conventions

false

boolean

signalDataCollection (mongodb)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

skippedOperations (mongodb)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes. By default, no operations will be skipped.

String

snapshotCollectionFilter​Overrides (mongodb)

This property contains a comma-separated list of ., for which the initial snapshot may be a subset of data present in the data source. The subset would be defined by mongodb filter query specified as value for property snapshot.collection.filter.override..

String

snapshotDelayMs (mongodb)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

0ms

long

snapshotFetchSize (mongodb)

The maximum number of records that should be loaded into memory while performing a snapshot

int

snapshotIncludeCollectionList (mongodb)

this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotMaxThreads (mongodb)

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

int

snapshotMode (mongodb)

The criteria for running a snapshot upon startup of the connector. Options include: 'initial' (the default) to specify the connector should always perform an initial sync when required; 'never' to specify the connector should never perform an initial sync

initial

String

sourceStructVersion (mongodb)

A version of the format of the publicly visible source part in the message

v2

String

tombstonesOnDelete (mongodb)

Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

boolean

The Debezium MongoDB Connector endpoint is configured using URI syntax:

debezium-mongodb:name

with the following path and query parameters:

Path Parameters (1 parameters):

Name Description Default Type

name

Required Unique name for the connector. Attempting to register again with the same name will fail.

String

Query Parameters (58 parameters):

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=\http://localhost:8811/avro

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

io.debezium.embedded.spi.OffsetCommitPolicy.PeriodicCommitOffsetPolicy

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

5s

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

60s

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. There are 3 enums and the value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

collectionExcludeList (mongodb)

A comma-separated list of regular expressions that match the collection names for which changes are to be excluded

String

collectionIncludeList (mongodb)

A comma-separated list of regular expressions that match the collection names for which changes are to be captured

String

connectBackoffInitialDelayMs (mongodb)

The initial delay when trying to reconnect to a primary after a connection cannot be made or when no primary is available, given in milliseconds. Defaults to 1 second (1,000 ms).

1s

long

connectBackoffMaxDelayMs (mongodb)

The maximum delay when trying to reconnect to a primary after a connection cannot be made or when no primary is available, given in milliseconds. Defaults to 120 second (120,000 ms).

2m

long

connectMaxAttempts (mongodb)

Maximum number of failed connection attempts to a replica set primary before an exception occurs and task is aborted. Defaults to 16, which with the defaults for 'connect.backoff.initial.delay.ms' and 'connect.backoff.max.delay.ms' results in just over 20 minutes of attempts before failing.

16

int

converters (mongodb)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'

String

databaseExcludeList (mongodb)

A comma-separated list of regular expressions that match the database names for which changes are to be excluded

String

databaseHistoryFileFilename (mongodb)

The path to the file that will be used to record the database history

String

databaseIncludeList (mongodb)

A comma-separated list of regular expressions that match the database names for which changes are to be captured

String

eventProcessingFailureHandling​Mode (mongodb)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped.

fail

String

fieldExcludeList (mongodb)

A comma-separated list of the fully-qualified names of fields that should be excluded from change event message values

String

fieldRenames (mongodb)

Description is not available here, please check Debezium website for corresponding key 'field.renames' description.

String

heartbeatIntervalMs (mongodb)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

0ms

int

heartbeatTopicsPrefix (mongodb)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

maxBatchSize (mongodb)

Maximum size of each batch of source records. Defaults to 2048.

2048

int

maxQueueSize (mongodb)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

int

maxQueueSizeInBytes (mongodb)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled

0

long

mongodbAuthsource (mongodb)

Database containing user credentials.

admin

String

mongodbConnectTimeoutMs (mongodb)

The connection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

int

mongodbHosts (mongodb)

The hostname and port pairs (in the form 'host' or 'host:port') of the MongoDB server(s) in the replica set.

String

mongodbMembersAutoDiscover (mongodb)

Specifies whether the addresses in 'hosts' are seeds that should be used to discover all members of the cluster or replica set ('true'), or whether the address(es) in 'hosts' should be used as is ('false'). The default is 'true'.

true

boolean

mongodbName (mongodb)

Required Unique name that identifies the MongoDB replica set or cluster and all recorded offsets, andthat is used as a prefix for all schemas and topics. Each distinct MongoDB installation should have a separate namespace and monitored by at most one Debezium connector.

String

mongodbPassword (mongodb)

Required Password to be used when connecting to MongoDB, if necessary.

String

mongodbPollIntervalMs (mongodb)

Interval for looking for new, removed, or changed replica sets, given in milliseconds. Defaults to 30 seconds (30,000 ms).

30s

long

mongodbServerSelectionTimeout​Ms (mongodb)

The server selection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

30s

int

mongodbSocketTimeoutMs (mongodb)

The socket timeout, given in milliseconds. Defaults to 0 ms.

0ms

int

mongodbSslEnabled (mongodb)

Should connector use SSL to connect to MongoDB instances

false

boolean

mongodbSslInvalidHostname​Allowed (mongodb)

Whether invalid host names are allowed when using SSL. If true the connection will not prevent man-in-the-middle attacks

false

boolean

mongodbUser (mongodb)

Database user for connecting to MongoDB, if necessary.

String

pollIntervalMs (mongodb)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

500ms

long

provideTransactionMetadata (mongodb)

Enables transaction metadata extraction together with event counting

false

boolean

queryFetchSize (mongodb)

The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size.

0

int

retriableRestartConnectorWait​Ms (mongodb)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

10s

long

sanitizeFieldNames (mongodb)

Whether field names will be sanitized to Avro naming conventions

false

boolean

signalDataCollection (mongodb)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

skippedOperations (mongodb)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes. By default, no operations will be skipped.

String

snapshotCollectionFilter​Overrides (mongodb)

This property contains a comma-separated list of ., for which the initial snapshot may be a subset of data present in the data source. The subset would be defined by mongodb filter query specified as value for property snapshot.collection.filter.override..

String

snapshotDelayMs (mongodb)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

0ms

long

snapshotFetchSize (mongodb)

The maximum number of records that should be loaded into memory while performing a snapshot

int

snapshotIncludeCollectionList (mongodb)

this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotMaxThreads (mongodb)

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

int

snapshotMode (mongodb)

The criteria for running a snapshot upon startup of the connector. Options include: 'initial' (the default) to specify the connector should always perform an initial sync when required; 'never' to specify the connector should never perform an initial sync

initial

String

sourceStructVersion (mongodb)

A version of the format of the publicly visible source part in the message

v2

String

tombstonesOnDelete (mongodb)

Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

boolean

Message headers

Consumer headers

The following headers are available when consuming change events from Debezium.

Header constant Header value Type Description

DebeziumConstants.HEADER_IDENTIFIER

"CamelDebeziumIdentifier"

String

The identifier of the connector, normally is this format "{server-name}.{database-name}.{table-name}".

DebeziumConstants.HEADER_KEY

"CamelDebeziumKey"

Struct

The key of the event, normally is the table Primary Key.

DebeziumConstants.HEADER_SOURCE_METADATA

"CamelDebeziumSourceMetadata"

Map

The metadata about the source event, for example table name, database name, log position, etc, please refer to the Debezium documentation for more info.

DebeziumConstants.HEADER_OPERATION

"CamelDebeziumOperation"

String

If presents, the type of event operation. Values for the connector are c for create (or insert), u for update, d for delete or r for read (in the case of a initial sync).

DebeziumConstants.HEADER_TIMESTAMP

"CamelDebeziumTimestamp"

Long

If presents, the time (using the system clock in the JVM) at which the connector processed the event.

Note: Debezium Mongodb uses MongoDB’s oplog to populate the CDC events, the update events in MongoDB’s oplog don’t have the before or after states of the changed document, so there’s no way for the Debezium connector to provide this information, therefore header key CamelDebeziumBefore is not available in this component.

Message body

The message body if is not null (in case of tombstones), it contains the state of the row after the event occurred as String JSON format and you can unmarchal using Camel JSON Data Format.

Samples

Consuming events

Here is a very simple route that you can use in order to listen to Debezium events from MongoDB connector.

from("debezium-mongodb:dbz-test-1?offsetStorageFileName=/usr/offset-file-1.dat&mongodbHosts=rs0/localhost:27017&mongodbUser=debezium&mongodbPassword=dbz&mongodbName=dbserver1&databaseHistoryFileName=/usr/history-file-1.dat")
    .log("Event received from Debezium : ${body}")
    .log("    with this identifier ${headers.CamelDebeziumIdentifier}")
    .log("    with these source metadata ${headers.CamelDebeziumSourceMetadata}")
    .log("    the event occured upon this operation '${headers.CamelDebeziumSourceOperation}'")
    .log("    on this database '${headers.CamelDebeziumSourceMetadata[db]}' and this table '${headers.CamelDebeziumSourceMetadata[table]}'")
    .log("    with the key ${headers.CamelDebeziumKey}")
    .choice()
        .when(header(DebeziumConstants.HEADER_OPERATION).in("c", "u", "r"))
            .unmarshal().json()
            .log("Event received from Debezium : ${body}")
         .end()
    .end();

By default, the component will emit the events in the body String JSON format in case of u, c or r operations, this can be easily converted to JSON using Camel JSON Data Format e.g: .unmarshal().json() like the above example. In case of operation d, the body will be null.

Important Note: This component is a thin wrapper around Debezium Engine as mentioned, therefore before using this component in production, you need to understand how Debezium works and how configurations can reflect the expected behavior, especially in regards to handling failures.

Spring Boot Auto-Configuration

When using debezium-mongodb with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-debezium-mongodb-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 59 options, which are listed below.

Name Description Default Type

camel.component.debezium-mongodb.additional-properties

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

camel.component.debezium-mongodb.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.debezium-mongodb.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.debezium-mongodb.collection-exclude-list

A comma-separated list of regular expressions that match the collection names for which changes are to be excluded.

String

camel.component.debezium-mongodb.collection-include-list

A comma-separated list of regular expressions that match the collection names for which changes are to be captured.

String

camel.component.debezium-mongodb.configuration

Allow pre-configured Configurations to be set. The option is a org.apache.camel.component.debezium.configuration.MongoDbConnectorEmbeddedDebeziumConfiguration type.

MongoDbConnectorEmbeddedDebeziumConfiguration

camel.component.debezium-mongodb.connect-backoff-initial-delay-ms

The initial delay when trying to reconnect to a primary after a connection cannot be made or when no primary is available, given in milliseconds. Defaults to 1 second (1,000 ms). The option is a long type.

1000

Long

camel.component.debezium-mongodb.connect-backoff-max-delay-ms

The maximum delay when trying to reconnect to a primary after a connection cannot be made or when no primary is available, given in milliseconds. Defaults to 120 second (120,000 ms). The option is a long type.

120000

Long

camel.component.debezium-mongodb.connect-max-attempts

Maximum number of failed connection attempts to a replica set primary before an exception occurs and task is aborted. Defaults to 16, which with the defaults for 'connect.backoff.initial.delay.ms' and 'connect.backoff.max.delay.ms' results in just over 20 minutes of attempts before failing.

16

Integer

camel.component.debezium-mongodb.converters

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

camel.component.debezium-mongodb.database-exclude-list

A comma-separated list of regular expressions that match the database names for which changes are to be excluded.

String

camel.component.debezium-mongodb.database-history-file-filename

The path to the file that will be used to record the database history.

String

camel.component.debezium-mongodb.database-include-list

A comma-separated list of regular expressions that match the database names for which changes are to be captured.

String

camel.component.debezium-mongodb.enabled

Whether to enable auto configuration of the debezium-mongodb component. This is enabled by default.

Boolean

camel.component.debezium-mongodb.event-processing-failure-handling-mode

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped.

fail

String

camel.component.debezium-mongodb.field-exclude-list

A comma-separated list of the fully-qualified names of fields that should be excluded from change event message values.

String

camel.component.debezium-mongodb.field-renames

Description is not available here, please check Debezium website for corresponding key 'field.renames' description.

String

camel.component.debezium-mongodb.heartbeat-interval-ms

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default. The option is a int type.

0

Integer

camel.component.debezium-mongodb.heartbeat-topics-prefix

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

camel.component.debezium-mongodb.internal-key-converter

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-mongodb.internal-value-converter

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-mongodb.max-batch-size

Maximum size of each batch of source records. Defaults to 2048.

2048

Integer

camel.component.debezium-mongodb.max-queue-size

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

Integer

camel.component.debezium-mongodb.max-queue-size-in-bytes

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

Long

camel.component.debezium-mongodb.mongodb-authsource

Database containing user credentials.

admin

String

camel.component.debezium-mongodb.mongodb-connect-timeout-ms

The connection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms). The option is a int type.

10000

Integer

camel.component.debezium-mongodb.mongodb-hosts

The hostname and port pairs (in the form 'host' or 'host:port') of the MongoDB server(s) in the replica set.

String

camel.component.debezium-mongodb.mongodb-members-auto-discover

Specifies whether the addresses in 'hosts' are seeds that should be used to discover all members of the cluster or replica set ('true'), or whether the address(es) in 'hosts' should be used as is ('false'). The default is 'true'.

true

Boolean

camel.component.debezium-mongodb.mongodb-name

Unique name that identifies the MongoDB replica set or cluster and all recorded offsets, andthat is used as a prefix for all schemas and topics. Each distinct MongoDB installation should have a separate namespace and monitored by at most one Debezium connector.

String

camel.component.debezium-mongodb.mongodb-password

Password to be used when connecting to MongoDB, if necessary.

String

camel.component.debezium-mongodb.mongodb-poll-interval-ms

Interval for looking for new, removed, or changed replica sets, given in milliseconds. Defaults to 30 seconds (30,000 ms). The option is a long type.

30000

Long

camel.component.debezium-mongodb.mongodb-server-selection-timeout-ms

The server selection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms). The option is a int type.

30000

Integer

camel.component.debezium-mongodb.mongodb-socket-timeout-ms

The socket timeout, given in milliseconds. Defaults to 0 ms. The option is a int type.

0

Integer

camel.component.debezium-mongodb.mongodb-ssl-enabled

Should connector use SSL to connect to MongoDB instances.

false

Boolean

camel.component.debezium-mongodb.mongodb-ssl-invalid-hostname-allowed

Whether invalid host names are allowed when using SSL. If true the connection will not prevent man-in-the-middle attacks.

false

Boolean

camel.component.debezium-mongodb.mongodb-user

Database user for connecting to MongoDB, if necessary.

String

camel.component.debezium-mongodb.offset-commit-policy

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

io.debezium.embedded.spi.OffsetCommitPolicy.PeriodicCommitOffsetPolicy

String

camel.component.debezium-mongodb.offset-commit-timeout-ms

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds. The option is a long type.

5000

Long

camel.component.debezium-mongodb.offset-flush-interval-ms

Interval at which to try committing offsets. The default is 1 minute. The option is a long type.

60000

Long

camel.component.debezium-mongodb.offset-storage

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

camel.component.debezium-mongodb.offset-storage-file-name

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

camel.component.debezium-mongodb.offset-storage-partitions

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

Integer

camel.component.debezium-mongodb.offset-storage-replication-factor

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

Integer

camel.component.debezium-mongodb.offset-storage-topic

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

camel.component.debezium-mongodb.poll-interval-ms

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms. The option is a long type.

500

Long

camel.component.debezium-mongodb.provide-transaction-metadata

Enables transaction metadata extraction together with event counting.

false

Boolean

camel.component.debezium-mongodb.query-fetch-size

The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size.

0

Integer

camel.component.debezium-mongodb.retriable-restart-connector-wait-ms

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms. The option is a long type.

10000

Long

camel.component.debezium-mongodb.sanitize-field-names

Whether field names will be sanitized to Avro naming conventions.

false

Boolean

camel.component.debezium-mongodb.signal-data-collection

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

camel.component.debezium-mongodb.skipped-operations

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes. By default, no operations will be skipped.

String

camel.component.debezium-mongodb.snapshot-collection-filter-overrides

This property contains a comma-separated list of ., for which the initial snapshot may be a subset of data present in the data source. The subset would be defined by mongodb filter query specified as value for property snapshot.collection.filter.override..

String

camel.component.debezium-mongodb.snapshot-delay-ms

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms. The option is a long type.

0

Long

camel.component.debezium-mongodb.snapshot-fetch-size

The maximum number of records that should be loaded into memory while performing a snapshot.

Integer

camel.component.debezium-mongodb.snapshot-include-collection-list

this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

camel.component.debezium-mongodb.snapshot-max-threads

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

Integer

camel.component.debezium-mongodb.snapshot-mode

The criteria for running a snapshot upon startup of the connector. Options include: 'initial' (the default) to specify the connector should always perform an initial sync when required; 'never' to specify the connector should never perform an initial sync.

initial

String

camel.component.debezium-mongodb.source-struct-version

A version of the format of the publicly visible source part in the message.

v2

String

camel.component.debezium-mongodb.tombstones-on-delete

Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

Boolean