AWS Secrets Manager

Since Camel 3.9

Only producer is supported

The AWS Secrets Manager component supports list secret AWS Secrets Manager service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon Secrets Manager. More information is available at AWS Secrets Manager.

URI Format

aws-secrets-manager://label[?options]

You can append query options to the URI in the following format, ?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The AWS Secrets Manager component supports 17 options, which are listed below.

Name Description Default Type

binaryPayload (producer)

Set if the secret is binary or not.

false

boolean

configuration (producer)

Component configuration.

SecretsManagerConfiguration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Required The operation to perform.

Enum values:

  • listSecrets

  • createSecret

  • getSecret

  • describeSecret

  • deleteSecret

  • rotateSecret

  • updateSecret

  • restoreSecret

  • replicateSecretToRegions

SecretsManagerOperations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

proxyHost (producer)

To define a proxy host when instantiating the Secrets Manager client.

String

proxyPort (producer)

To define a proxy port when instantiating the Secrets Manager client.

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the Secrets Manager client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

region (producer)

The region in which Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

secretsManagerClient (producer)

Autowired To use a existing configured AWS Secrets Manager as client.

SecretsManagerClient

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

Endpoint Options

The AWS Secrets Manager endpoint is configured using URI syntax:

aws-secrets-manager:label

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

label (producer)

Required Logical name.

String

Query Parameters (15 parameters)

Name Description Default Type

binaryPayload (producer)

Set if the secret is binary or not.

false

boolean

operation (producer)

Required The operation to perform.

Enum values:

  • listSecrets

  • createSecret

  • getSecret

  • describeSecret

  • deleteSecret

  • rotateSecret

  • updateSecret

  • restoreSecret

  • replicateSecretToRegions

SecretsManagerOperations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

proxyHost (producer)

To define a proxy host when instantiating the Secrets Manager client.

String

proxyPort (producer)

To define a proxy port when instantiating the Secrets Manager client.

Integer

proxyProtocol (producer)

To define a proxy protocol when instantiating the Secrets Manager client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

region (producer)

The region in which Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

secretsManagerClient (producer)

Autowired To use a existing configured AWS Secrets Manager as client.

SecretsManagerClient

trustAllCertificates (producer)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

Using AWS Secrets Manager Property Function

To use this function you’ll need to provide credentials to AWS Secrets Manager Service as environment variables:

export $CAMEL_VAULT_AWS_ACCESS_KEY=accessKey
export $CAMEL_VAULT_AWS_SECRET_KEY=secretKey
export $CAMEL_VAULT_AWS_REGION=region

You can also configure the credentials in the application.properties file such as:

camel.vault.aws.accessKey = accessKey
camel.vault.aws.secretKey = secretKey
camel.vault.aws.region = region

If you want instead to use the AWS default credentials provider, you’ll need to provide the following env variables:

export $CAMEL_VAULT_AWS_USE_DEFAULT_CREDENTIALS_PROVIDER=true
export $CAMEL_VAULT_AWS_REGION=region

You can also configure the credentials in the application.properties file such as:

camel.vault.aws.defaultCredentialsProvider = true
camel.vault.aws.region = region

At this point you’ll be able to reference a property in the following way:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route}}"/>
    </route>
</camelContext>

Where route will be the name of the secret stored in the AWS Secrets Manager Service.

You could specify a default value in case the secret is not present on AWS Secret Manager:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route:default}}"/>
    </route>
</camelContext>

In this case if the secret doesn’t exist, the property will fallback to "default" as value.

Also you are able to get particular field of the secret, if you have for example a secret named database of this form:

{
  "username": "admin",
  "password": "password123",
  "engine": "postgres",
  "host": "127.0.0.1",
  "port": "3128",
  "dbname": "db"
}

You’re able to do get single secret value in your route, like for example:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username}}"/>
    </route>
</camelContext>

Or re-use the property as part of an endpoint.

You could specify a default value in case the particular field of secret is not present on AWS Secret Manager:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username:admin}}"/>
    </route>
</camelContext>

In this case if the secret doesn’t exist or the secret exists, but the username field is not part of the secret, the property will fallback to "admin" as value.

There is also the syntax to get a particular version of the secret for both the approach, with field/default value specified or only with secret:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

This approach will return the RAW route secret with version 'bf9b4f4b-8e63-43fd-a73c-3e2d3748b451'.

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route:default@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

This approach will return the route secret value with version 'bf9b4f4b-8e63-43fd-a73c-3e2d3748b451' or default value in case the secret doesn’t exist or the version doesn’t exist.

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username:admin@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

This approach will return the username field of the database secret with version 'bf9b4f4b-8e63-43fd-a73c-3e2d3748b451' or admin in case the secret doesn’t exist or the version doesn’t exist.

For the moment we are not considering the rotation function, if any will be applied, but it is in the work to be done.

The only requirement is adding the camel-aws-secrets-manager jar to your Camel application.

Automatic Camel context reloading on Secret Refresh

Being able to reload Camel context on a Secret Refresh, could be done by specifying the usual credentials (the same used for AWS Secret Manager Property Function).

With Environment variables:

export $CAMEL_VAULT_AWS_USE_DEFAULT_CREDENTIALS_PROVIDER=accessKey
export $CAMEL_VAULT_AWS_REGION=region

or as plain Camel main properties:

camel.vault.aws.useDefaultCredentialProvider = true
camel.vault.aws.region = region

Or by specifying accessKey/SecretKey and region, instead of using the default credentials provider chain.

To enable the automatic refresh you’ll need additional properties to set:

camel.vault.aws.refreshEnabled=true
camel.vault.aws.refreshPeriod=60000
camel.vault.aws.secrets=Secret
camel.main.context-reload-enabled = true

where camel.vault.aws.refreshEnabled will enable the automatic context reload, camel.vault.aws.refreshPeriod is the interval of time between two different checks for update events and camel.vault.aws.secrets is a regex representing the secrets we want to track for updates.

Note that camel.vault.aws.secrets is not mandatory: if not specified the task responsible for checking updates events will take into accounts or the properties with an aws: prefix.

Message Headers

The AWS Secrets Manager component supports 8 message header(s), which is/are listed below:

Name Description Default Type

CamelAwsSecretsManagerOperation (producer)

Constant: OPERATION

The operation we want to perform.

String

CamelAwsSecretsManagerMaxResults (producer)

Constant: MAX_RESULTS

The number of results to include in the response.

Integer

CamelAwsSecretsManagerSecretName (producer)

Constant: SECRET_NAME

The name of the secret.

String

CamelAwsSecretsManagerSecretDescription (producer)

Constant: SECRET_DESCRIPTION

The description of the secret.

String

CamelAwsSecretsManagerSecretId (producer)

Constant: SECRET_ID

The ARN or name of the secret.

String

CamelAwsSecretsManagerLambdaRotationFunctionArn (producer)

Constant: LAMBDA_ROTATION_FUNCTION_ARN

The ARN of the Lambda rotation function that can rotate the secret.

String

CamelAwsSecretsManagerSecretVersionId (producer)

Constant: SECRET_VERSION_ID

The unique identifier of the version of the secret.

String

CamelAwsSecretsManagerSecretReplicationRegions (producer)

Constant: SECRET_REPLICATION_REGIONS

A comma separated list of Regions in which to replicate the secret.

String

Secrets Manager Producer operations

Camel-AWS-Secrets-manager component provides the following operation on the producer side:

  • listSecrets

  • createSecret

  • deleteSecret

  • describeSecret

  • rotateSecret

  • getSecret

  • updateSecret

  • replicateSecretToRegions

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws-secrets-manager</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws-secrets-manager with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-secrets-manager-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 18 options, which are listed below.

Name Description Default Type

camel.component.aws-secrets-manager.access-key

Amazon AWS Access Key.

String

camel.component.aws-secrets-manager.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-secrets-manager.binary-payload

Set if the secret is binary or not.

false

Boolean

camel.component.aws-secrets-manager.configuration

Component configuration. The option is a org.apache.camel.component.aws.secretsmanager.SecretsManagerConfiguration type.

SecretsManagerConfiguration

camel.component.aws-secrets-manager.enabled

Whether to enable auto configuration of the aws-secrets-manager component. This is enabled by default.

Boolean

camel.component.aws-secrets-manager.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-secrets-manager.operation

The operation to perform.

SecretsManagerOperations

camel.component.aws-secrets-manager.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

Boolean

camel.component.aws-secrets-manager.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws-secrets-manager.proxy-host

To define a proxy host when instantiating the Secrets Manager client.

String

camel.component.aws-secrets-manager.proxy-port

To define a proxy port when instantiating the Secrets Manager client.

Integer

camel.component.aws-secrets-manager.proxy-protocol

To define a proxy protocol when instantiating the Secrets Manager client.

Protocol

camel.component.aws-secrets-manager.region

The region in which Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws-secrets-manager.secret-key

Amazon AWS Secret Key.

String

camel.component.aws-secrets-manager.secrets-manager-client

To use a existing configured AWS Secrets Manager as client. The option is a software.amazon.awssdk.services.secretsmanager.SecretsManagerClient type.

SecretsManagerClient

camel.component.aws-secrets-manager.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws-secrets-manager.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws-secrets-manager.use-default-credentials-provider

Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean
Back to top